Pioneer DV-667A-K, DV-563A, DV-667A-S Basic playback controls, Shows Resume or Last MEM

Getting started 04

•My AV receiver is definitely compatible with 96/88.2kHz Linear PCM audio, but it doesn’t seem to work with this player. What’s wrong?

For digital copy-protection purposes, some 96/88.2kHz DVD discs only output digital audio downsampled to 48/44.1kHz. This is not a malfunction.

To fully take advantage of the high sampling rate audio, connect the analog audio outputs to your amplifier/receiver.

•Why can’t I hear SACD audio through the digital outputs?

SACD audio is only available through the analog outputs. This is not a malfunction. Some DVD-Audio discs too only output audio through the analog outputs.

•Is it better to listen to DVD-Audio discs through the analog outputs?

Some DVD-Audio discs do not output anything through the digital outputs, and multichannel discs are downmixed to stereo for the digital output. In addition, high sampling rate DVD-Audio discs (higher than 96kHz) automatically down- sample audio output from the digital outputs.

Using the multichannel analog audio outputs for DVD-Audio have none of these limitations.

•My DVD-Audio disc starts playing, but then suddenly stops!

The disc may have been illegally copied.

Basic playback controls

The table below shows the basic controls on the remote for playing discs. The following chapter covers more playback features in more detail.

Button	What it does
	Starts playback.
	DVD and Video CD: If the display
	shows RESUME or LAST MEM
	playback starts from the resume or
	last memory point (see also
	Resume and Last Memory below.)
	Pauses a disc that’s playing, or
	restarts a paused disc.
	Stops playback.
	DVD and Video CD: Display shows
	RESUME. Press (stop) again to
	cancel the resume function. (See
	also Resume and Last Memory
	below.)
	Press to start fast reverse scan-
	ning. Press	(play) to resume
	normal playback.
	Press to start fast forward scan-
	ning. Press	(play) to resume
	normal playback.

Skips to the start of the current track or chapter, then to previous tracks/chapters.

Skips to the next track or chapter.

Numbers Use to enter a title/track number. Press ENTER to select (or wait a few seconds).

•If the disc is stopped, playback starts from the selected title (for DVD) or track number (for CD/ SACD/Video CD/Super VCD/MP3 ).

•If the disc is playing, playback jumps to the start of the selected chapter or track (within the cur-

rent group for DVD-Audio). 31

En