Mouse: The original factory presets can be reloaded by holding down the Ctrl- key and clicking on any preset button. Alternatively the files described above can be renamed, moved to a different directory, or being deleted.
Keyboard: Using Ctrl and any number between 1 and 8 (not on the numeric keypad!) will load the corresponding factory default preset. The key Alt will load the user presets instead.
When loading a preset file, for example 'Main Monitor AN 1_2 plus headphone mix 3_4.mad', the file name will be displayed in the title bar of the TotalMix window. Also when loading a pre- set by the preset buttons, the name of the preset is displayed in the title bar. This way it is al- ways clear what the current TotalMix state is based on.
The eight factory presets offer a pretty good base to modify them to your personal needs. In all factory presets Submix View is active by default.
Preset 1
Description: All channels routed 1:1, monitoring of all playback channels.
Details: All inputs maximum attenuation. All playback channels 0 dB, routed to the same output. All outputs 0 dB. Level display set to RMS +3 dB. View Submix active.
Note: This preset is Default, offering the standard functionality of a
Preset 2
Description: All channels routed 1:1, input and playback monitoring. As Preset 1, plus 1:1 pass through of all inputs.
Preset 3
Description: All channels routed 1:1, no input and no playback monitoring. All faders set to maximum attenuation.
Preset 4
Description: All channels routed 1:1, input and playback monitoring. As Preset 2, but all inputs muted.
Preset 5
Description: All channels routed 1:1, playback monitoring. Submix of all playback channels to channels 63/64 (phones monitoring). Hardware output 63/64 selected and at
Preset 6
Description: As prest 5, but submix of all input channels to channels 63/64 (phones monitoring).
Preset 7
Description: As preset 5, but submix of all input and playback channels to channels 63/64 (phones monitoring).
Preset 8
Description: Panic. As Preset 4, but playback channels muted too (no output signal).
Preset Banks
Instead of a single preset, all eight presets can be stored and loaded at once. This is done via Menu File, Save All Presets as and Open All Presets (file suffix .map). After the loading the presets can be activated by the preset buttons. In case the presets have been renamed (see chapter 24.11), these names will be stored and loaded too.
50 | User's Guide HDSP MADI © RME |