Listening to the Radio
There are two ways to select radio stations:
•Manual tuning
•Presetting radio stations then selecting the preset channels
Tuning Manually
STANDBY/ON |
|
|
|
|
|
|
|
|
|
|
| MASTER VOLUME | |
STANDBY |
| ACOUSTIC |
|
|
|
|
POWER | DISPLAY | CONTROL FM MODE |
|
|
|
|
ON OFF |
| DVD / CD |
|
|
|
|
PHONES | INPUT | PRESET |
| SUBWOOFER | SPEAKER SPEAKER | |
|
| TUNING/PRESET MEMORY | SURROUND STEREO T – D | MODE | A / B | SETUP |
12,3 FM MODE
1 | Unit | Press INPUT / repeatedly to |
| select the band (FM or AM). | |
|
| e.g. When FM is selected. |
| INPUT |
|
|
| FM |
|
| Note |
|
| You can also select the band with the remote |
|
| controller. See next page. |
2 | Unit only | Press and hold TUNING/PRESET |
| qor wfor about 1.5 seconds. | |
TUNING/PRESET | Appears when a broadcast is received. |
•When the band is FM
Auto tuning starts. The frequency changes in 50 kHz steps.
When a broadcast is received, scanning stops and the frequency flashes in the display.
•When the band is AM
The frequency changes in 9 kHz steps. When you release the button, the frequency stops changing and flashes in the display.
3 | While the frequency is flashing (for |
about 5 seconds), press TUNING/ | |
TUNING/PRESET | PRESET q/wto change the |
| frequency. |
ch
•The frequency changes in 50 kHz steps in FM and 9 kHz in AM each time you press TUNING/PRESET qor w.
•You can change the frequency as long as the frequency in the display is flashing. Each press of either button causes the frequency to flash for about 5 seconds.
Tuning in a weak frequency (only for FM stations)
When you tune in a stereo FM station, the FM ST indicator lights up if the signal is sufficiently strong.
FM MUTE
FM ST
If the signal is weak, you may not be able to tune to the station. In this case, press FM MODE. The FM MUTE indicator goes off. Then select the station to which you want to listen.
(At this time, the station will be in mono and interstation noise will be heard.)
Unit Only
FM MODE
Presetting Radio Stations
You can preset up to 30 stations.
STANDBY/ON |
|
|
|
|
|
|
|
|
|
|
| MASTER VOLUME | |
STANDBY |
| ACOUSTIC |
|
|
|
|
POWER | DISPLAY | CONTROL FM MODE |
|
|
|
|
ON OFF |
| DVD / CD |
|
|
|
|
PHONES | INPUT | PRESET |
| SUBWOOFER | SPEAKER SPEAKER | |
|
| TUNING/PRESET MEMORY | SURROUND STEREO T – D | MODE | A / B | SETUP |
|
| 3 2,4 |
|
|
|
1 |
| Tune in the radio station you wish |
| to preset (see steps in the left | |
|
| column of this page). |
|
|
|
2 | Unit only | Press PRESET MEMORY. |
PRESET | The MEMORY indicator lights and the |
MEMORY | preset number starts flashing in the |
| |
| display. |
| MEMORY |
| ch |
3 | While the MEMORY indicator is lit |
(for about 8 seconds), press |
TUNING/PRESET | TUNING/PRESET q/wto |
| |
| select the preset number. |
| MEMORY |
ch
4 | PRESET | Press PRESET MEMORY. |
MEMORY | The radio station is registered to the |
preset channel.
To register another preset station, repeat steps 1 to 4.
26