OPERATING THE RECEIVER
Main Menu
After installing your cable system and STB with appropriate connectors.
●Plug in the AC main power and switch on the receiver.
●Press the MENU key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed.
For the
Before you begin with the “Installation” menu, you should check in the 3th menu “System” whether all the information are applicable for you.
1. Installation
The menu provides settings for customizing, adding new services and displaying the status of the receiver.
●Select “Installation” in the main menu to select the sub menu.
●Enter the PIN Code.
If you have not entered your own PIN Code then the
PIN Code 0000 applies, which was set at the factory.
OPERATING THE RECEIVER 
1.1 Manual Scanning
To
“Manual Scanning” where the channel data can be entered by the user. After selecting the “Manual Scanning” from the Installation Menu, the following screen will be displayed:
●Input the frequency of the channel you want to find.
●Input the Network ID of the channel you want to find. Ask your cable operator.
●Select the Modulation of the channel you want to find. You can select the value of 16, 32, 64, 128 and 256.
●Input the symbol rate of channel you want to find.
●After select option, press the OK key to start the scan process.
●Press the EXIT key to exit the menu .
Note : When you see “NOT COMPLETE CHANNEL”, please scan again with following instuction of service provider.
1.2 Parental Control
Parental rating protects your children from adult content.
This option is set in Installation Parental Control menu.
●Use the keys to select age for your youngest child then press the OK key to save this setting.
●All services which age grade is greater than set will be blocked and request to enter the PIN Code.
●If you want blocked all services, select “ALL BLOCKED”.
●By default, all services are “UNBLOCKED”.
Please enter the PIN Code.
●This banner is shown if service which age grade is greater than set in Parental Control menu. Enter four digits PIN Code to hide this banner and show service content.
Factory PIN Code is 0000, and you can change it in Change PIN Code menu.
●Press the EXIT key to exit the menu.
GB
D I G I T A L | C A B L E | R E C E I V E R |