BASIC FUNCTIONS 
5. Channel List
●Press the CH LIST key while you are viewing a program.
●Select list by pressing the TV/RADIO key.
The 
icon behind the channel name symbolises scrambled
channel, and the 
icon behind the channel name shows locked channel.
●Select the channel by pressing the keys on the remote control.
●Press the OK key to watch that channel.
The colour key corresponds the following service list.
●YELLOW key : Favorites
● RED key | : Alphabetical |
● Press the | <>(Page Up/Dn) keys to move to next or previous page. |
●Press the EXIT key to exit.
5.1 Favorite Channel List
●Press the YELLOW key on the remote control to select the group of favorite channel list.
●Press the YELLOW key to switch between favorite channel list and channel list.
●Use the keys to select a favorite group or a channel that you want.
● Press the <> (Page Up/Dn) keys to move to next or previous page.
●Press the EXIT key to exit
5.2 Alphabetical Channel LIst
●Press the RED key on the remote control to select the Alphabetical channel list.
●Press the RED key to switch between alphabetical channel list and channel list.
●Use the keys to select a Alphabetical group or a channel that you want.
●Press the EXIT key to exit.
BASIC FUNCTIONS 
6. Guide (EPG) Menu
EPG-Electronic Program Guide
The electronic program guide gives you information for the channels.
Note : 1. This service depends on service provider.
2.After receiver recognized the
●Press the GUIDE key while you are viewing a program.
●RED key is for moving back to the previous date.
●GREEN key is for moving to the next coming date.
●YELLOW key can be used for scroll up, if there is more information than one page.
●BLUE key can be used for scroll down, if there is more information than one page.
Time interval can be adjusted by press keys as followings on EPG screen:
1 key: 1 hour and 30 minutes 2 key: 30 minutes | 3 key: 15 minutes |
With the TV/RADIO key you can browse among the various programs lists.
●Select the channel by pressing the keys and press the OK key to watch this channel.
●When the TIMER key on the remote control is pressed in the EPG screen, if the current channel involves an event, timer is set immediately and the set timer is indicated on the EPG screen.
A program that has been set in this way is indicated on Timer Setting.
GB
D I G I T A L | C A B L E | R E C E I V E R |