OPERATING THE RECEIVER 
3.6 System Information
If you have to contact your service provider or a service center they might ask for information available from this menu.
Place the cursor on this sub menu and press the OK key. The following will be the
● Press the EXIT key to exit the menu.
OPERATING THE RECEIVER
5. Irdeto Menu
The menu provides the information of the smartcard and the STB. Press the OK key to enter the sub menu.
4. Mail Box
You can read the message sent to the individual decoders. We can save the maximum 10 mail messages.
●Press the EXIT key to exit the menu.
5.1 CA Status
You can see the CA status (Smart Card EMM/ECM information).
●Press the EXIT key to exit the menu.
5.2 IRD Status
You can see the IRD status (technical information about the IRD, CA, Smart Card and software loaded into it).
●Press the EXIT key to exit the menu.
5.3 Loader Status
You can see the information about the IRD, and software loaded into it.
●Press the EXIT key to exit the menu.
GB
D I G I T A L | C A B L E | R E C E I V E R |