OPERATING THE RECEIVER
1.3 Reset to Factory Defaults
This is to recover the Factory set values in case the user has encountered some problems after changing any values of channel data and others which may be in error.
The screen display will be as follows:
At the request window, if you press the OK key, the receiver will be reset to factory default settings automatically.
Note : This causes your previous settings to be deleted!
All settings and information including channel data will be deleted.
●Press the EXIT key to exit the menu .
1.4 Software Update
This option is enabled only if your cable provider sends software for your STB.
To upgrade the software, place the cursor on Installation Software Update menu and press the OK key. If new software is available, banner “Start Software Updating Process ?” will be displayed. There is also information about estimated time of software download. Press the OK key to confirm and start Software Updating process.
If there is newest software on your STB “You don’t need to update software !” will be displayed.
Note : STB automatically reboots for software upgrading process. During the upgrading process, TV screen will remain blank for approximately 10 minutes. Window display at the STB front panel will show the progress. Service will be resumed automatically after the upgrade is completed.
●Press the EXIT key to exit the menu.
OPERATING THE RECEIVER
2.2 Favorite Channels
You can immediately register the present channel to the desired Favorite Group.
In addition, you can register a channel to multiple favorite groups.
●Select the desired Favorite Group(FAV1~FAV4) using the FAV.CH key.
●Select the desired channel list using the or numeric keys at the TV or RADIO list window.
●Press the RED key and then register the selected
channel at the Favorite Group.
●Then press the OK key for confirmation.
You can change TV list or Radio list by the TV/RADIO key and change favorite list by the FAV.CH key.
●When you press the TV/RADIO key, TV list and Radio list are toggled.
●Press the FAV.CH key to select another favorite list.
●Press the EXIT key to exit the menu.
To delete channels from Favorite Group:
●Select a channel list to delete with the keys.
●Press the RED key to delete the selected channel from the favorite channels.
●Press the EXIT key to exit the menu.
Note : One favorite list can contain max 200 channels.
GB
2. Channel
The “Channel” menu has three functions:
Saving changes on channel list by select Update List and it provides making four favourite lists and set channel lock, as you want.
●Enter the PIN Code.
If you have not entered your own PIN Code, 0000 applies which was set at the factory.
2.1 Update List
When some new channels will be transmitted to your cable network, these channels would be shown on channel list green colored. To save these channels, use Channel Update
List.
2.3 Set Channel Lock
●Select the TV or RADIO channel window by pressing the keys.
●Focus the channel by pressing the keys.
●Select the channel lock by pressing the RED key.
●Press the OK key for confirmation.
This will lock the channel. Whenever you need to view the channel, you will have to enter the PIN Code at the request window.
To cancel the lock:
●Press the RED key again in order to cancel the lock.
●Press the EXIT key to exit the menu .
.
D I G I T A L | C A B L E | R E C E I V E R |