Toshiba 44HM85 owner manual VCR Connections

VCR Connections

1	Locate the Antenna jack on the
	back of your TV. Connect this to
	RF out jack on the back of your
	VCR.
	Or, find the composite video and
	audio jacks on the back of your
	VCR, and connect them following
	the instructions provided with
	your equipment.
	You may connect either the com-
	posite video or the S-Video cables

Cable TV

Wall Jack Panel

to your TV. (Do not connect both

the composite and the S-Video

cables. In the event that you con-

nect both composite and the S-

Video cables, only the S-Video will

work.)

RF Coaxial Wire (75 ohm)

Antenna

Round Wire

(75 ohm)

MONITOR

OUT

VIDEO 2

INPUT

VIDEO 1

INPUT

S-VIDEO

Back AV Panel
	Output	In	VIDEO
			MONO
3 4	Switch
		Out	(L)
Audio Video S-Video
			AUDIO
L	R		(R)

VCR	A/V cables
	not included
	with TV

WTo hear stereo sound from cable or your VCR, you will need to connect A/V cables as well as the wire that runs from the VCR to your TV.

WIf you want to receive your signals on Channel 3 or 4, locate the Out to TV jack on your VCR. Connect a cable from the Out to TV jack to the Antenna In jack on the back of your TV.

The unauthorized recording, use distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

P A G E 1 2