HDMI
-HDMI , the HDMI logo and
-This set can receive the
-This set supports HDCP
-When you Connect with HDMI Source Devices (DVD Player or Set Top Box or PC) supporting Auto HDMI func- tion, automatically, support Plug & Play and then set the HDMI Source Devices (640 x 480p). After reading in HDMI Source Devices using Display Data Channel(DDC) Protocol, EDID stored in the set is used. If HDMI Source Devices not supported Auto HDMI is been, the Resolution is set, manually.
-To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
-To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
-When Source Devices have DVI Output Connector, you must connect audio with separated cable.(Refer to <How to connect>)
How to connect
1. When Source Devices (DVD Player or Set Top Box) support HDMI.
- If Source Devices have HDMI Output Connector, Source Devices connect to the set with HDMI Cable .(not sup- plied with the product).
-If Source Devices support Auto HDMI, automatically, Source Devices divert output resolution in 1280 x 720p. But if the resolution has to be changed manually refer to the source devices owner manual.
-To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
-Because HDMI sends Digital Video and Audio with one cable, need not especial Audio Cable for using HDMI Cable.
2. When Source Devices (DVD Player or Set Top Box) supports DVI.
-If Source Devices have DVI Output Connector, Source Devices connect to the set with HDMI to DVI Cable (not supplied with the product).
-If Source Devices support Auto DVI, automatically, Source Devices divert output resolution in 1280 x 720p. But if the resolution has to be changed manually refer to the source devices owner manual.
-To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
-In this case, Audio use other cable. When Source Devices have Analog Audio Output Connector, RGB/DVI Audio Input of the set connect to Audio Cable (not supplied with the product). And then you can listen to normal Audio.
3. When PC supports DVI.
-If PC have DVI Output Connector, Source Devices connect to the set with HDMI to DVI Cable (not supplied with the product).
-To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
-Use the the set’s HDMI (VIDEO) for video connections, depending on your PC connector.
-If the graphics card on the PC does not output analog RGB and DVI simultaneously, connect only one of either RGB Input or HDMI Input to display the PC on the set.
-If he graphics card on the PC does output analog RGB and DVI simultaneously, change the input to either RGB Input or HDMI Input; (the other mode is set to Plug and Play automatically by the set.)
-Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as required.
-In this case, Audio use other cable. When PC (or sound card of PC) have Analog Audio Output Connector, RGB/DVI Audio Input of the set connect to Analog Audio Cable (not supplied with the product). And then you can listen to normal Audio.