Samsung SRD-440 user manual Part Names and Functions Rear

Page 10

overview

PART NAMES AND FUNCTIONS (REAR)

bc

1	2		AUDIO IN
1	2					ALARM OUT
						ALARM OUT
				VGA	ALARM IN	1 COM
				VGA	ALARM IN	RS-485
				1	2 3 4 G G	+
3	4
	VIDEO IN	VIDEO OUT (SPOT)	AUDIO OUT	SERIAL

NETWORK

DC 12 V

CONSOLE

USB

Part Names	Functions
VIDEO IN	Input port for the composite video signal.

bVIDEO OUT (SPOT) BNC type of output port for the composite video signal.

c AUDIO IN		Input ports (RCA jack) for the audio signal.
	VGA	Output port for VGA video signal.
	NETWORK	NETWORK connector port.
	DC 12V	DVR power input port.
	USB	USB connector port.
	ALARM IN	1~4, G : Alarm Input port.
	ALARM OUT	1, COM : Alarm Output port.
	RS-485	Used to establish RS-485 communications.

SERIAL

Serial port for connecting to a POS device.

AUDIO OUT

Output port (RCA jack) for the audio signal.

M If the VGA cable is connected, the video source from the VGA adaptor will be played as main screen. Then, the [VIDEO OUT] signal will be changed to the Spot signal.

The monitor distributor is not supported.

To play the video from the VGA adaptor properly, the DVR must have set to turn on the VGA monitor.

The man screen is defaulted to [VIDEO OUT]. If you change it to the VGA source, the [VIDEO OUT] source will be changed to the Spot signal.

10_ overview

Image 10

Contents Channel DVR SRD-440Channel DVR Important Safety Instructions  OverviewBattery Before StartContents Search & Play WEB ViewerFeatures Package Contents Standards ApprovalsPart Names and Functions Front Part Names and Functions Rear Using the Numeric buttons Remote ControlChanging the Remote Control ID Installation Checking the Installation EnvironmentConnecting POS Device Connecting the VIDEO, AUDIO, and MonitorConnecting the USB  Connecting with Other DeviceConnecting the alarm input signal Connecting the Alarm INPUT/OUTPUTConnecting the RS-485 Device Connecting the alarm output signalConnecting to the Network using the router Connecting the NetworkConnecting to Network through Ethernet 10/100BaseT  Connecting withConnecting to Network through Adsl Shutting Down the System Getting StartedStarting the system  LiveLogin Locking All ButtonsIcons on the Live Screen Live Screen ConfigurationLive Split Mode Menu Error InformationSplit Mode Menu Live Screen MenuSingle Mode Menu System Date/Time/Language Time. PTZ Alarm FreezeView the Launcher Menu PTZSwitching the screen automatically Live ModeSwitching the screen mode PIPChannel Setting Switching to Single ModeZoom Selecting a Spot Out modeSpot OUT Multichannel Live MenuAudio ON/OFF Audio ON/OFF in Single modeYou can turn the sound on/off the CH1 in Live mode FreezeCH2 Setting the Date/Time/Language System SetupDate/Time/Language Setting Holiday Using the CalendarPermission Management Setting the AdministratorUsing Virtual Keyboard Permission Management Using the DVR Setting the GroupTo set the group authority To change the user password To restrict the user permissionsWhen the user setup is done, press OK Setting the UserSetting Permissions SetupSystem Management System ManagementChecking the System Information System Information Using Updating the SoftwareLog Information SettingsSystem Log Use the up/down buttons Backup LogEvent Log Select Event Log Use direction buttonsCamera Setting the DeviceSetting the Camera Press Enter buttonTo set the privacy zone Screen SetupClear All Selected cell is removed from the Privacy Region Storage Device Setting the PTZConfirming Devices Formatting HDD AlarmHDD Alarm You can format a storage deviceItem, and press Enter button Remote DevicesPOS Devices Remote DeviceAdd Preset Preset SetupSetting Display position Setting the MonitorMonitor Setting the Spot Out Setting the Screen ModeRecord Setting the RecordingRecording Schedule Recording ScheduleEvent Record Duration REC Quality / ResolutionSetting Standard Recording Properties Recording Color TagsSetting Event Recording Properties Record OptionSensor Detection Setting the EventWindow of sensor detection setup appears Detection, and press Enter buttonSetting the Motion Detection Area Motion DetectionAlarm Schedule Alarm ScheduleWindow of video loss detection area setup appears Video Loss DetectionYou can backup the desired data to a connected device BackupSetting the Backup BackupSetting the Connection Network ConfigurationConnection Mode You can set the network connection route and protocolMove to Connection Mode, and press Enter Setting the ProtocolProtocol Connecting and Setting the Network When no router is usedWhen a router is used Internal Port Range Set the same to the External Port RangeLive Transfer Ddns SettingLive Transfer Smtp Setting Mailing ServiceEvent Setting When the recipient setting is done, press OK Group SettingRecipient Setting RecipientPTZ Device Using the PTZ cameraControlling a PTZ Device Getting started with PTZPreset Setting Camera SettingTime Search It does not appear in Backup SearchSearch You can search for recorded data of a desired timeEvent Search Backup SearchSearch & Play Select POS Search in the Search menu POS SearchMotion Search POS SearchPlay Backup RangePlayback  For data search, refer to Search.Mode Switch Using the Playback ButtonREC Records all channels in Live mode Partial Backup DVR setIntroducing WEB Viewer What is Web Viewer?Product Features System RequirementsConnecting WEB Viewer Click InstallUsing Live Viewer OSD Information Display You can change the split mode by clicking each number iconSingle Mode SPLIT-SCREENChanging the Live Screen Mode Setting the display of the OSD time informationConnected DVR Saving the Live Screen on the PC Capture Saves the current screen into a BMP or Jpeg fileUsing PTZ Camera Changing the Live Screen ChannelWeb viewer Using Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar Searching the Recorded Video in the TimelineSystem Viewer SetupYou can configure the various settings of the DVR system Controlling PlaybackHoliday Permission ManagementSystem Management Device CameraRemote Device Storage DevicePOS Device Monitor Recording Schedule For more information, refer to Setting the Recording.Record Event Record DurationRecord Option REC Quality & ResolutionEvent Sensor DetectionMotion Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Video Loss DetectionNetwork For more information, refer to Network Configuration.You can check the Ddns settings ConnectionLive Transfer Mailing ServiceSmtp About Mobile Viewer What is Mobile Viewer?Key Features Compatible SmartphoneSEC Backup Viewer Recommended System Requirements Backup Viewer SEQUENCE, PIP Product SpecificationRTP, RTSP, HTTP, CGI ERNA/GE/VCL TP/VICON/ELMO 500GB Sata HDDHdmi  AppendixProduct Overview Default Setting 43219600 Category Details Factory DefaultDuration 255.255.255.0 192.168.1.200192.168.1.1 168.126.63.1Troubleshooting Split mode HDD installed. Try again with a different HDDBy the service personnel Icon on the launcher to switch to Live mode4CIF 2CIFCIF Version 2, June Open Source License Report on the ProductPreamble USAPage No Warranty Some devices are designed to deny users access to How to Apply These Terms to Your New ProgramsGNU Lesser General Public License instead of this License Terms and Conditions Source CodeConveying Verbatim Copies Additional Terms Acceptance Not Required for Having Copies Automatic Licensing of Downstream RecipientsUse with the GNU Affero General Public License PatentsRevised Versions of this License Interpretation of Sections 15 Limitation of LiabilityEND of Terms and Conditions Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries OpenSSL License Original SSLeay LicensePage Correct disposal of batteries in this product Sales Network Chertsey, Surrey, United Kingdom KT16 OPS