Samsung SRD-440 user manual Storage Device, Setting the PTZ, Confirming Devices

using the DVR

Setting the PTZ

To use Camera’s PTZ functions, ID and protocols of each camera and DVR should be matched. For other settings, refer to the “Remote Devices” settings. (Page 42)

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Device> window to	Camera
	move to <Camera>, and press [ENTER] button.
				Camera	PTZ
2.	Select <PTZ>.
				CH	ID		Protocol 
				2	1	>	None	
	A window of PTZ settings appears.			1	0	>	None	
3.				3	2	>	None	
	Use direction buttons (	) to move to a desired		4	3	>	None	
	item, and select it.

•ID : Set the ID of the connected camera of each channel. You can easily setup by using the numeric buttons on the

OK Cancel

remote control.

•Protocol : Set the protocol of the connected camera of each channel.

M You can check the camera’s ID and protocol if you turn the camera off and on after connecting it to the DVR. (Page 61)

4.When the PTZ setup is done, press <OK>.

Storage Device

You can check information on storage devices.

Confirming Devices

You can check storage devices and their free space, usage as well as status.

Devices available are HDD, and USB devices (Memory, HDD).

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Device> window to move to <Storage Device>, and press [ENTER] button.

2.Select <Device>.

•No. : Shows the assigned number of the internal HDD.

•Used/Total : Shows the used/total capacity of the storage device.

•Used : Sets the storage device’s usage.

-USB memory is used for backup purpose only.

•Status/Management : Shows the current status of the HDD, as in Normal/Check/Replace.

-Normal : Available to use

-Check : Available to use but recommended to replace

-Replace : Requires immediate replacement.

3.To move to the previous menu, press <OK>.

Storage Device
Device		Format	HDD Alarm
Device	No.	Used/Total	Used	Status/Management
HDD	1	0G/499.49G	Internal	Normal
		OK	Cancel

40_ using the DVR