Samsung SRD-440 user manual Connecting WEB Viewer, Click Install

Page 68

web viewer

CONNECTING WEB VIEWER

1.Open your web browser and type the IP address or URL of DVR into the URL address box.

MThe basic URL of the DVR is as following in case of MAC address :

http://www.samsungipolis.com/Product domain (registered at the iPOLiS web site)

You can also use registered URL which setups up in the Setup menu of your DVR.

2.Set the Admin ID and password same to those of the DVR Admin.

For general users, enter the DVR user ID and password.

J The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.

Note that the security and other related issues caused by the unchanged password shall be responsible for the user.

M It allows up to 4 simultaneous access including the Admin and general users.

It does not allow multiple login of the Admin user.

Initial password of the Admin user is set to “4321”.

Password of the Admin and general users can be changed in <Permission Management> menu of the DVR.

Normal users should have set <Viewer> under <Permission Management> to “Use” before connecting to the Web Viewer. (Page 33)

All settings are applied by the DVR’s settings.

3.Click <Install ActiveX Control…>.

Downloading Active-X control may take several minutes according to the security settings on your PC.

4.Click <Install>.

68_ web viewer

Image 68

Contents Channel DVR SRD-440Channel DVR Important Safety Instructions  OverviewBattery Before StartContents Search & Play WEB ViewerFeatures Package Contents Standards ApprovalsPart Names and Functions Front Part Names and Functions Rear Changing the Remote Control ID Remote ControlUsing the Numeric buttons Installation Checking the Installation EnvironmentConnecting the VIDEO, AUDIO, and Monitor Connecting the USBConnecting POS Device  Connecting with Other DeviceConnecting the Alarm INPUT/OUTPUT Connecting the RS-485 DeviceConnecting the alarm input signal Connecting the alarm output signalConnecting the Network Connecting to Network through Ethernet 10/100BaseTConnecting to the Network using the router  Connecting withConnecting to Network through Adsl Getting Started Starting the systemShutting Down the System  LiveLogin Locking All ButtonsLive Live Screen ConfigurationIcons on the Live Screen Error Information Split Mode MenuSplit Mode Menu Live Screen MenuSingle Mode Menu PTZ Alarm Freeze View the Launcher MenuSystem Date/Time/Language Time. PTZLive Mode Switching the screen modeSwitching the screen automatically PIPChannel Setting Switching to Single ModeSelecting a Spot Out mode Spot OUTZoom Multichannel Live MenuAudio ON/OFF in Single mode You can turn the sound on/off the CH1 in Live modeAudio ON/OFF FreezeCH2 Date/Time/Language System SetupSetting the Date/Time/Language Setting Holiday Using the CalendarSetting the Administrator Using Virtual KeyboardPermission Management Permission ManagementTo set the group authority Setting the Group Using the DVR To change the user password To restrict the user permissionsSetting the User Setting PermissionsWhen the user setup is done, press OK SetupSystem Management Checking the System InformationSystem Management System Information Using Updating the SoftwareSystem Log SettingsLog Information Backup Log Event LogUse the up/down buttons Select Event Log Use direction buttonsSetting the Device Setting the CameraCamera Press Enter buttonClear All Selected cell is removed from the Privacy Region Screen SetupTo set the privacy zone Confirming Devices Setting the PTZStorage Device HDD Alarm HDD AlarmFormatting You can format a storage deviceRemote Devices POS DevicesItem, and press Enter button Remote DeviceAdd Preset Preset SetupMonitor Setting the MonitorSetting Display position Setting the Spot Out Setting the Screen ModeSetting the Recording Recording ScheduleRecord Recording ScheduleREC Quality / Resolution Setting Standard Recording PropertiesEvent Record Duration Recording Color TagsSetting Event Recording Properties Record OptionSetting the Event Window of sensor detection setup appearsSensor Detection Detection, and press Enter buttonSetting the Motion Detection Area Motion DetectionAlarm Schedule Window of video loss detection area setup appearsAlarm Schedule Video Loss DetectionBackup Setting the BackupYou can backup the desired data to a connected device BackupNetwork Configuration Connection ModeSetting the Connection You can set the network connection route and protocolProtocol Setting the ProtocolMove to Connection Mode, and press Enter Connecting and Setting the Network When no router is usedWhen a router is used Internal Port Range Set the same to the External Port RangeLive Transfer Ddns SettingLive Transfer Event Setting Mailing ServiceSmtp Setting Group Setting Recipient SettingWhen the recipient setting is done, press OK RecipientUsing the PTZ camera Controlling a PTZ DevicePTZ Device Getting started with PTZPreset Setting Camera SettingIt does not appear in Backup Search SearchTime Search You can search for recorded data of a desired timeSearch & Play Backup SearchEvent Search POS Search Motion SearchSelect POS Search in the Search menu POS SearchBackup Range PlaybackPlay  For data search, refer to Search.Using the Playback Button REC Records all channels in Live mode Partial BackupMode Switch DVR setWhat is Web Viewer? Product FeaturesIntroducing WEB Viewer System RequirementsConnecting WEB Viewer Click InstallUsing Live Viewer You can change the split mode by clicking each number icon Single ModeOSD Information Display SPLIT-SCREENConnected DVR Setting the display of the OSD time informationChanging the Live Screen Mode Saving the Live Screen on the PC Capture Saves the current screen into a BMP or Jpeg fileUsing PTZ Camera Changing the Live Screen ChannelWeb viewer Using Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar Searching the Recorded Video in the TimelineViewer Setup You can configure the various settings of the DVR systemSystem Controlling PlaybackHoliday Permission ManagementSystem Management Device CameraPOS Device Storage DeviceRemote Device Monitor For more information, refer to Setting the Recording. RecordRecording Schedule Event Record DurationREC Quality & Resolution EventRecord Option Sensor DetectionAlarm Schedule You can set the alarm output time if a video loss occursMotion Detection Video Loss DetectionFor more information, refer to Network Configuration. You can check the Ddns settingsNetwork ConnectionSmtp Mailing ServiceLive Transfer About What is Mobile Viewer? Key FeaturesMobile Viewer Compatible SmartphoneSEC Backup Viewer Recommended System Requirements Backup Viewer RTP, RTSP, HTTP, CGI Product SpecificationSEQUENCE, PIP 500GB Sata HDD HdmiERNA/GE/VCL TP/VICON/ELMO  AppendixProduct Overview Default Setting 4321Duration Category Details Factory Default9600 192.168.1.200 192.168.1.1255.255.255.0 168.126.63.1Troubleshooting HDD installed. Try again with a different HDD By the service personnelSplit mode Icon on the launcher to switch to Live mode4CIF 2CIFCIF Open Source License Report on the Product PreambleVersion 2, June USAPage No Warranty GNU Lesser General Public License instead of this License How to Apply These Terms to Your New ProgramsSome devices are designed to deny users access to Terms and Conditions Source CodeConveying Verbatim Copies Additional Terms Acceptance Not Required for Having Copies Automatic Licensing of Downstream RecipientsRevised Versions of this License PatentsUse with the GNU Affero General Public License END of Terms and Conditions Limitation of LiabilityInterpretation of Sections 15 Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries OpenSSL License Original SSLeay LicensePage Correct disposal of batteries in this product Sales Network Chertsey, Surrey, United Kingdom KT16 OPS