Samsung SRD-440 user manual Setting the Protocol, Move to Connection Mode, and press Enter

Page 54

using the DVR

IP, Gateway, Subnet Mask, and DNS

-For <Static IP> : You can directly input IP address, Gateway, Subnet Mask and DNS.

-For <Dynamic IP> : IP address, Gateway, and Subnet Mask are set automatically.

-For <ADSL> : IP address, Gateway, and Subnet Mask are set automatically.

User ID, Password : In case you selected ADSL, provide the “User ID” and its “Password”.

Connection Mode

 

 

Connection

Protocol

 

 

Connection Mode

ADSL

 

 

Bandwidth

600kbps

 

 

IP

192.168. 1.200

 

Gateway

192.168. 1.

1

 

Subnet Mask

255.255.255. 0

 

DNS

Manual

168.126. 63.

1

User ID

ID

 

 

Password

************

 

 

 

OK

Cancel

 

MDNS server for <Dynamic IP> and <ADSL> can be set by user only if you selected <Manual>.

6.When the connection setup is done, press <OK>.

Setting the Protocol

1.

Use the up/down buttons (

) in <Network> window to

 

move to <Connection Mode>, and press [ENTER]

2.

button.

 

Select <Protocol>.

 

3.

Use direction buttons (

) to move to a desired

 

item, and set the value.

 

Protocol Type : Select the protocol type between TCP and UDP.

If selected UDP, selections of Port (TCP), Port (UDP), and Unicast/ Multicast are activated.

Connection Mode

 

 

 

Connection

Protocol

 

 

Protocol Type

TCP

 

 

 

Port(TCP)

554

 

~

558

Port(UDP)

8000 ~ 8160

 

 

Unicast/Multicast

Unicast

 

 

 

Multicast IP

224.126.

63.

1

 

TTL

5

 

 

 

Webviewer Port

80

 

 

 

 

 

OK

 

Cancel

If setting the connection mode to ADSL, you cannot select UDP for the protocol type.

Port(TCP) : Initially, <554~558> is set. It increases / decreases by 5.

- TCP: It has better stability and lower speed when compared to UDP, and recommended for internet environments.

Port(UDP) : Initially, <8000~8160> is set. It increases / decreases by 160.

- UDP : It has less stability and faster speed when compared to TCP, and recommended for local area network (LAN) environments.

Unicast/Multicast : Select one between Unicast and Multicast. If selected Multicast, Multicast IP and TTL are activated.

- Unicast : Transfers data (UDP, TCP) individually to each connecting client.

- Multicast : Multiple client can receive the data (only in UDP) without putting additional traffic load to the network.

Multicast IP : User can directly input.

TTL : Select from 0 ~ 255. Initial value for the TTL is set to <5>.

Webviewer Port : Enter the port number for the Web Viewer. Initially, it is set to <80>.

MAs UDP protocol may cause a packet loss on the network, it is recommended to use TCP protocols.

If you select UDP protocols and set port forwarding in the IP router, ending up with an unstable network connection, configure the DMZ settings in the IP router as necessary.

4.When the protocol setup is done, press <OK>.

54_ using the DVR

Image 54
Contents Channel DVR SRD-440Channel DVR Important Safety Instructions  OverviewBattery Before StartContents Search & Play WEB ViewerFeatures Package Contents Standards ApprovalsPart Names and Functions Front Part Names and Functions Rear Remote Control Using the Numeric buttonsChanging the Remote Control ID Installation Checking the Installation EnvironmentConnecting POS Device Connecting the VIDEO, AUDIO, and MonitorConnecting the USB  Connecting with Other DeviceConnecting the alarm input signal Connecting the Alarm INPUT/OUTPUTConnecting the RS-485 Device Connecting the alarm output signalConnecting to the Network using the router Connecting the NetworkConnecting to Network through Ethernet 10/100BaseT  Connecting withConnecting to Network through Adsl Shutting Down the System Getting StartedStarting the system  LiveLogin Locking All ButtonsLive Screen Configuration Icons on the Live ScreenLive Split Mode Menu Error InformationSplit Mode Menu Live Screen MenuSingle Mode Menu System Date/Time/Language Time. PTZ Alarm FreezeView the Launcher Menu PTZSwitching the screen automatically Live ModeSwitching the screen mode PIPChannel Setting Switching to Single ModeZoom Selecting a Spot Out modeSpot OUT Multichannel Live MenuAudio ON/OFF Audio ON/OFF in Single modeYou can turn the sound on/off the CH1 in Live mode FreezeCH2 System Setup Setting the Date/Time/LanguageDate/Time/Language Setting Holiday Using the CalendarPermission Management Setting the AdministratorUsing Virtual Keyboard Permission ManagementSetting the Group  Using the DVRTo set the group authority To change the user password To restrict the user permissionsWhen the user setup is done, press OK Setting the UserSetting Permissions SetupSystem Management System ManagementChecking the System Information System Information Using Updating the SoftwareSettings Log InformationSystem Log Use the up/down buttons Backup LogEvent Log Select Event Log Use direction buttonsCamera Setting the DeviceSetting the Camera Press Enter buttonScreen Setup To set the privacy zoneClear All Selected cell is removed from the Privacy Region Setting the PTZ Storage DeviceConfirming Devices Formatting HDD AlarmHDD Alarm You can format a storage deviceItem, and press Enter button Remote DevicesPOS Devices Remote DeviceAdd Preset Preset SetupSetting the Monitor Setting Display positionMonitor Setting the Spot Out Setting the Screen ModeRecord Setting the RecordingRecording Schedule Recording ScheduleEvent Record Duration REC Quality / ResolutionSetting Standard Recording Properties Recording Color TagsSetting Event Recording Properties Record OptionSensor Detection Setting the EventWindow of sensor detection setup appears Detection, and press Enter buttonSetting the Motion Detection Area Motion DetectionAlarm Schedule Alarm ScheduleWindow of video loss detection area setup appears Video Loss DetectionYou can backup the desired data to a connected device BackupSetting the Backup BackupSetting the Connection Network ConfigurationConnection Mode You can set the network connection route and protocolSetting the Protocol Move to Connection Mode, and press EnterProtocol Connecting and Setting the Network When no router is usedWhen a router is used Internal Port Range Set the same to the External Port RangeDdns Setting Live TransferLive Transfer Mailing Service Smtp SettingEvent Setting When the recipient setting is done, press OK Group SettingRecipient Setting RecipientPTZ Device Using the PTZ cameraControlling a PTZ Device Getting started with PTZPreset Setting Camera SettingTime Search It does not appear in Backup SearchSearch You can search for recorded data of a desired timeBackup Search Event SearchSearch & Play Select POS Search in the Search menu POS SearchMotion Search POS SearchPlay Backup RangePlayback  For data search, refer to Search.Mode Switch Using the Playback ButtonREC Records all channels in Live mode Partial Backup DVR setIntroducing WEB Viewer What is Web Viewer?Product Features System RequirementsConnecting WEB Viewer Click InstallUsing Live Viewer OSD Information Display You can change the split mode by clicking each number iconSingle Mode SPLIT-SCREENSetting the display of the OSD time information Changing the Live Screen ModeConnected DVR Saving the Live Screen on the PC Capture Saves the current screen into a BMP or Jpeg fileUsing PTZ Camera Changing the Live Screen ChannelWeb viewer Using Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar Searching the Recorded Video in the TimelineSystem Viewer SetupYou can configure the various settings of the DVR system Controlling PlaybackHoliday Permission ManagementSystem Management Device CameraStorage Device Remote DevicePOS Device Monitor Recording Schedule For more information, refer to Setting the Recording.Record Event Record DurationRecord Option REC Quality & ResolutionEvent Sensor DetectionMotion Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Video Loss DetectionNetwork For more information, refer to Network Configuration.You can check the Ddns settings ConnectionMailing Service Live TransferSmtp About Mobile Viewer What is Mobile Viewer?Key Features Compatible SmartphoneSEC Backup Viewer Recommended System Requirements Backup Viewer Product Specification SEQUENCE, PIPRTP, RTSP, HTTP, CGI ERNA/GE/VCL TP/VICON/ELMO 500GB Sata HDDHdmi  AppendixProduct Overview Default Setting 4321Category Details Factory Default 9600Duration 255.255.255.0 192.168.1.200192.168.1.1 168.126.63.1Troubleshooting Split mode HDD installed. Try again with a different HDDBy the service personnel Icon on the launcher to switch to Live mode4CIF 2CIFCIF Version 2, June Open Source License Report on the ProductPreamble USAPage No Warranty How to Apply These Terms to Your New Programs Some devices are designed to deny users access toGNU Lesser General Public License instead of this License Terms and Conditions Source CodeConveying Verbatim Copies Additional Terms Acceptance Not Required for Having Copies Automatic Licensing of Downstream RecipientsPatents Use with the GNU Affero General Public LicenseRevised Versions of this License Limitation of Liability Interpretation of Sections 15END of Terms and Conditions Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries OpenSSL License Original SSLeay LicensePage Correct disposal of batteries in this product Sales Network Chertsey, Surrey, United Kingdom KT16 OPS