Samsung SRD-440 user manual Freeze, Event Monitoring, Audio ON/OFF in Single mode

Page 26

live

AUDIO ON/OFF

You can turn the sound on/off the CH1 in Live mode.

AUDIO ON/OFF in Single mode

Click the audio icon ( ) on the screen, or press the [AUDIO] button on the remote control to turn it on/off.

M Only the channel where <AUDIO> is set to <ON> in “Device > Camera” displays the audio icon ( ) in Live mode that you can use to turn the sound on/off.

FREEZE

This is available only in Live mode, this pauses playing the Live image temporarily.

1. Press the [FREEZE] button the remote control, or click < Freeze > in the launcher menu. The playback of the image is stopped temporarily.

2.Press the [FREEZE] button again, or click < Freeze >. This will release the freeze.

EVENT MONITORING

This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.

In “Monitor > Event Display”, set the event monitoring to ON/OFF and specify the event display time. (Page 44)

•If multiple events occur simultaneously, the screen will switch to a split mode. - 2~4 events : 4-split mode

•If the second event occurs within the set time of <Event Display>, the first event will last until the second one is terminated. (Page 44)

 Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.

Event occurrence		5 seconds

Stop alarm

CH1

26_ live

Image 26

Contents Channel DVR SRD-440Channel DVR Important Safety Instructions  OverviewBattery Before StartContents Search & Play WEB ViewerFeatures Package Contents Standards ApprovalsPart Names and Functions Front Part Names and Functions Rear Changing the Remote Control ID Remote ControlUsing the Numeric buttons Installation Checking the Installation EnvironmentConnecting POS Device Connecting the VIDEO, AUDIO, and MonitorConnecting the USB  Connecting with Other DeviceConnecting the alarm input signal Connecting the Alarm INPUT/OUTPUTConnecting the RS-485 Device Connecting the alarm output signalConnecting to the Network using the router Connecting the NetworkConnecting to Network through Ethernet 10/100BaseT  Connecting withConnecting to Network through Adsl Shutting Down the System Getting StartedStarting the system  LiveLogin Locking All ButtonsLive Live Screen ConfigurationIcons on the Live Screen Split Mode Menu Error InformationSplit Mode Menu Live Screen MenuSingle Mode Menu System Date/Time/Language Time. PTZ Alarm FreezeView the Launcher Menu PTZSwitching the screen automatically Live ModeSwitching the screen mode PIPChannel Setting Switching to Single ModeZoom Selecting a Spot Out modeSpot OUT Multichannel Live MenuAudio ON/OFF Audio ON/OFF in Single modeYou can turn the sound on/off the CH1 in Live mode FreezeCH2 Date/Time/Language System SetupSetting the Date/Time/Language Setting Holiday Using the CalendarPermission Management Setting the AdministratorUsing Virtual Keyboard Permission ManagementTo set the group authority Setting the Group Using the DVR To change the user password To restrict the user permissionsWhen the user setup is done, press OK Setting the UserSetting Permissions SetupSystem Management System ManagementChecking the System Information System Information Using Updating the SoftwareSystem Log SettingsLog Information Use the up/down buttons Backup LogEvent Log Select Event Log Use direction buttonsCamera Setting the DeviceSetting the Camera Press Enter buttonClear All Selected cell is removed from the Privacy Region Screen SetupTo set the privacy zone Confirming Devices Setting the PTZStorage Device Formatting HDD AlarmHDD Alarm You can format a storage deviceItem, and press Enter button Remote DevicesPOS Devices Remote DeviceAdd Preset Preset SetupMonitor Setting the MonitorSetting Display position Setting the Spot Out Setting the Screen ModeRecord Setting the RecordingRecording Schedule Recording ScheduleEvent Record Duration REC Quality / ResolutionSetting Standard Recording Properties Recording Color TagsSetting Event Recording Properties Record OptionSensor Detection Setting the EventWindow of sensor detection setup appears Detection, and press Enter buttonSetting the Motion Detection Area Motion DetectionAlarm Schedule Alarm ScheduleWindow of video loss detection area setup appears Video Loss DetectionYou can backup the desired data to a connected device BackupSetting the Backup BackupSetting the Connection Network ConfigurationConnection Mode You can set the network connection route and protocolProtocol Setting the ProtocolMove to Connection Mode, and press Enter Connecting and Setting the Network When no router is usedWhen a router is used Internal Port Range Set the same to the External Port RangeLive Transfer Ddns SettingLive Transfer Event Setting Mailing ServiceSmtp Setting When the recipient setting is done, press OK Group SettingRecipient Setting RecipientPTZ Device Using the PTZ cameraControlling a PTZ Device Getting started with PTZPreset Setting Camera SettingTime Search It does not appear in Backup SearchSearch You can search for recorded data of a desired timeSearch & Play Backup SearchEvent Search Select POS Search in the Search menu POS SearchMotion Search POS SearchPlay Backup RangePlayback  For data search, refer to Search.Mode Switch Using the Playback ButtonREC Records all channels in Live mode Partial Backup DVR setIntroducing WEB Viewer What is Web Viewer?Product Features System RequirementsConnecting WEB Viewer Click InstallUsing Live Viewer OSD Information Display You can change the split mode by clicking each number iconSingle Mode SPLIT-SCREENConnected DVR Setting the display of the OSD time informationChanging the Live Screen Mode Saving the Live Screen on the PC Capture Saves the current screen into a BMP or Jpeg fileUsing PTZ Camera Changing the Live Screen ChannelWeb viewer Using Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar Searching the Recorded Video in the TimelineSystem Viewer SetupYou can configure the various settings of the DVR system Controlling PlaybackHoliday Permission ManagementSystem Management Device CameraPOS Device Storage DeviceRemote Device Monitor Recording Schedule For more information, refer to Setting the Recording.Record Event Record DurationRecord Option REC Quality & ResolutionEvent Sensor DetectionMotion Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Video Loss DetectionNetwork For more information, refer to Network Configuration.You can check the Ddns settings ConnectionSmtp Mailing ServiceLive Transfer About Mobile Viewer What is Mobile Viewer?Key Features Compatible SmartphoneSEC Backup Viewer Recommended System Requirements Backup Viewer RTP, RTSP, HTTP, CGI Product SpecificationSEQUENCE, PIP ERNA/GE/VCL TP/VICON/ELMO 500GB Sata HDDHdmi  AppendixProduct Overview Default Setting 4321Duration Category Details Factory Default9600 255.255.255.0 192.168.1.200192.168.1.1 168.126.63.1Troubleshooting Split mode HDD installed. Try again with a different HDDBy the service personnel Icon on the launcher to switch to Live mode4CIF 2CIFCIF Version 2, June Open Source License Report on the ProductPreamble USAPage No Warranty GNU Lesser General Public License instead of this License How to Apply These Terms to Your New ProgramsSome devices are designed to deny users access to Terms and Conditions Source CodeConveying Verbatim Copies Additional Terms Acceptance Not Required for Having Copies Automatic Licensing of Downstream RecipientsRevised Versions of this License PatentsUse with the GNU Affero General Public License END of Terms and Conditions Limitation of LiabilityInterpretation of Sections 15 Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries OpenSSL License Original SSLeay LicensePage Correct disposal of batteries in this product Sales Network Chertsey, Surrey, United Kingdom KT16 OPS