Samsung SRD-440 user manual To set the privacy zone, Screen Setup

Page 39

CH Name : Up to 15 characters including blanks are allowed. (The first character should not be empty.)

Refer to “Using Virtual Keyboard”. (Page 30)

SEQ-Dwell Time : You can set the dwell time between channels for the Live screen and Spot Out.

If set to <OFF>, the channel is not listed in the Auto Sequence mode.

Screen Setup : The video appeared on the screen may vary depending on the channel’s camera, configure the DVR display to your preferences.

Select a channel and adjust the <(Brightness)>,

< (Contrast)>, and < (Color)> of the selected channel.

Press the <Init> to initialize settings back to the default 50.

Privacy Region : You can specify a certain area of the camera video to be protected for your privacy.

6.When the camera setup is done, press <OK>.

Screen Setup

 

 

 

 

USING

 

 

 

 

THE

CH1

50

50

50

Init

Apply to All CH

 

 

OK

 

Cancel

 

 

 

 

 

DVR

 

 

 

 

 

 

To set the privacy zone

Select <Privacy Region>.

When “Privacy Region” window appears, select a channel for detection and set the area of motion detection.

To set the area in “Privacy Region” window

In the “Privacy Region” window, select desired region

from <>.

Privacy Region

You can specify up to 4 privacy zones for each channel, which can be identified by the color.

Privacy Region

CH1

Privacy Region1

Individual

Apply to All CH

OK Cancel

1 Purple 2 Green 3 Blue 4 Yellow

To set the area using <Individual> selection

When selected <Individual>, “Privacy Region” window disappears and you can select cells one by one. When the motion area setup is done, Right-click to select <Menu> in the context menu or the [MENU] button on the remote control to display the “Privacy Region” window again.

-Clear All : Selected cell is removed from the Privacy Region.

-Menu : After selecting individual motion areas, move to the “Privacy Region” window.

If selected <Apply to All CH>, selected motion area is applied to all channels.

When completing the privacy zone settings, click <OK>.

Clear All

Menu

English _39

Image 39
Contents SRD-440 Channel DVRChannel DVR  Overview Important Safety InstructionsBefore Start BatteryContents WEB Viewer Search & PlayFeatures Standards Approvals Package ContentsPart Names and Functions Front Part Names and Functions Rear Remote Control Using the Numeric buttonsChanging the Remote Control ID Checking the Installation Environment Installation Connecting with Other Device Connecting the VIDEO, AUDIO, and MonitorConnecting the USB Connecting POS DeviceConnecting the alarm output signal Connecting the Alarm INPUT/OUTPUTConnecting the RS-485 Device Connecting the alarm input signal Connecting with Connecting the NetworkConnecting to Network through Ethernet 10/100BaseT Connecting to the Network using the routerConnecting to Network through Adsl  Live Getting StartedStarting the system Shutting Down the SystemLocking All Buttons LoginLive Screen Configuration Icons on the Live ScreenLive Live Screen Menu Error InformationSplit Mode Menu Split Mode MenuSingle Mode Menu PTZ PTZ Alarm FreezeView the Launcher Menu System Date/Time/Language Time.PIP Live ModeSwitching the screen mode Switching the screen automaticallySwitching to Single Mode Channel SettingMultichannel Live Menu Selecting a Spot Out modeSpot OUT ZoomFreeze Audio ON/OFF in Single modeYou can turn the sound on/off the CH1 in Live mode Audio ON/OFFCH2 System Setup Setting the Date/Time/LanguageDate/Time/Language Using the Calendar Setting HolidayPermission Management Setting the AdministratorUsing Virtual Keyboard Permission ManagementSetting the Group  Using the DVRTo set the group authority To restrict the user permissions To change the user passwordSetup Setting the UserSetting Permissions When the user setup is done, press OKSystem Information System ManagementChecking the System Information System ManagementUpdating the Software  UsingSettings Log InformationSystem Log Select Event Log Use direction buttons Backup LogEvent Log Use the up/down buttonsPress Enter button Setting the DeviceSetting the Camera CameraScreen Setup To set the privacy zoneClear All Selected cell is removed from the Privacy Region Setting the PTZ Storage DeviceConfirming Devices You can format a storage device HDD AlarmHDD Alarm FormattingRemote Device Remote DevicesPOS Devices Item, and press Enter buttonPreset Setup Add PresetSetting the Monitor Setting Display positionMonitor Setting the Screen Mode Setting the Spot OutRecording Schedule Setting the RecordingRecording Schedule RecordRecording Color Tags REC Quality / ResolutionSetting Standard Recording Properties Event Record DurationRecord Option Setting Event Recording PropertiesDetection, and press Enter button Setting the EventWindow of sensor detection setup appears Sensor DetectionMotion Detection Setting the Motion Detection AreaVideo Loss Detection Alarm ScheduleWindow of video loss detection area setup appears Alarm ScheduleBackup BackupSetting the Backup You can backup the desired data to a connected deviceYou can set the network connection route and protocol Network ConfigurationConnection Mode Setting the ConnectionSetting the Protocol Move to Connection Mode, and press EnterProtocol When no router is used Connecting and Setting the NetworkInternal Port Range Set the same to the External Port Range When a router is usedDdns Setting Live TransferLive Transfer Mailing Service Smtp SettingEvent Setting Recipient Group SettingRecipient Setting When the recipient setting is done, press OKGetting started with PTZ Using the PTZ cameraControlling a PTZ Device PTZ DeviceCamera Setting Preset SettingYou can search for recorded data of a desired time It does not appear in Backup SearchSearch Time SearchBackup Search Event SearchSearch & Play POS Search POS SearchMotion Search Select POS Search in the Search menu For data search, refer to Search. Backup RangePlayback PlayDVR set Using the Playback ButtonREC Records all channels in Live mode Partial Backup Mode SwitchSystem Requirements What is Web Viewer?Product Features Introducing WEB ViewerClick Install Connecting WEB ViewerUsing Live Viewer SPLIT-SCREEN You can change the split mode by clicking each number iconSingle Mode OSD Information DisplaySetting the display of the OSD time information Changing the Live Screen ModeConnected DVR Capture Saves the current screen into a BMP or Jpeg file Saving the Live Screen on the PCChanging the Live Screen Channel Using PTZ CameraWeb viewer Using Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Timeline Searching the Recorded Video in the CalendarControlling Playback Viewer SetupYou can configure the various settings of the DVR system SystemPermission Management HolidaySystem Management Camera DeviceStorage Device Remote DevicePOS Device Monitor Event Record Duration For more information, refer to Setting the Recording.Record Recording ScheduleSensor Detection REC Quality & ResolutionEvent Record OptionVideo Loss Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Motion DetectionConnection For more information, refer to Network Configuration.You can check the Ddns settings NetworkMailing Service Live TransferSmtp About Compatible Smartphone What is Mobile Viewer?Key Features Mobile ViewerRecommended System Requirements SEC Backup Viewer Backup Viewer Product Specification SEQUENCE, PIPRTP, RTSP, HTTP, CGI  Appendix 500GB Sata HDDHdmi ERNA/GE/VCL TP/VICON/ELMOProduct Overview 4321 Default SettingCategory Details Factory Default 9600Duration 168.126.63.1 192.168.1.200192.168.1.1 255.255.255.0Troubleshooting Icon on the launcher to switch to Live mode HDD installed. Try again with a different HDDBy the service personnel Split mode4CIF 2CIFCIF USA Open Source License Report on the ProductPreamble Version 2, JunePage No Warranty How to Apply These Terms to Your New Programs Some devices are designed to deny users access toGNU Lesser General Public License instead of this License Source Code Terms and ConditionsConveying Verbatim Copies Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having CopiesPatents Use with the GNU Affero General Public LicenseRevised Versions of this License Limitation of Liability Interpretation of Sections 15END of Terms and Conditions Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries Original SSLeay License OpenSSL LicensePage Correct disposal of batteries in this product Chertsey, Surrey, United Kingdom KT16 OPS Sales Network