Samsung SRD-450 user manual Display, Record, Switching the screen mode, Auto Sequence

DISPLAY

You can select a screen split mode or perform the auto sequence function.

Switching the screen mode

You select a screen mode from single and 4-split.

1.Press the <DISP> button from the Launcher menu.

2.Select a split mode in the split option menu. Press the [MODE] button on the front panel or the remote control to switch the mode in the sequence of the launcher menu items.

					LIVE
MENU	BACKUP	SEARCH	DISP	REC	ow

Auto Sequence

You can perform the auto sequence function.

1.Press the <DISP> button from the Launcher menu or press the [MODE] on the remote control.

2.When the split mode selection menu appears, press the <> button.

The screen mode switches to Single while transition.

M You can adjust the screen transition interval in “SYSTEM SETUP > DISPLAY > MONITOR > SEQUENCE DWELL”. (Page 31)

CH4

CH3

CH2

CH1

 You can also add a sequence using the same menu. 4

Single mode

RECORD

In addition to the existing recording, you can proceed with recording directly in Live mode.

1

1.Press the <REC> button from the Launcher menu or press the [REC] on the remote control.

This can be done by right-clicking any area to display the context menu where you select <RECORD START>.

When the recording starts, <RECORD START> will switch to <RECORD STOP>.

2.The recording starts immediately with the <I> mark displayed on the top right corner.

3.To stop recording, press the <REC> button or click <RECORD STOP>.

MENU BACKUP SEARCH DISP REC ow

English _21