Samsung SRD-450 user manual If not using a router for network connection, If using a router

Page 39

If not using a router for network connection

Static IP Setup Mode

Internet Connection: Use ADSL or the dedicated line for the static IP, or connect between DVR and remote users in the LAN environment.

DVR Network Setup: Check the network status of the connected DVR.

For other options of IP, gateway and subnet mask, contact the network administrator.

NETWORK

IP SETUP

DHCP

 

 

 

DDNS

IP ADDRESS

 

 

0.0.0.0

GATEWAY

 

 

0.0.0.0

E-MAIL

SUBNET MASK

 

 

0.0.0.0

1st DNS SERVER

 

 

0.0.0.0

 

2nd DNS SERVER

 

 

0.0.0.0

 

RTSP SERVICE PORT

554

AUTO PORT

DELETE PORT PORT TEST

 

WEB SERVER PORT

8080

AUTO PORT

DELETE PORT

 

DDNS HOST NAME

http://ff00378.websamsung.net:8080

MAX TX SPEED

8192 KBYTE

DVR

HELP

CANCEL

APPLY

CLOSE

Dynamic IP (DHCP) Setup Mode

Internet Connection: Connect the DVR directly to the cable modem, to a DHCP-based ADSL modem, or to the optical LAN.

DVR Network Setup: Check the <DHCP> checkbox of the <IP SETUP> menu.

If using a router

Connect the DVR to the IP router that is connected to the ADSL/Cable modem, or connect the DVR to the IP router in the LAN environment.

MFor more information, refer to “Network Setup Guide” that comes with the DVR.

SETUP

Router DHCP IP Address Setup

1.To access the setup menu of the IP router, provide the IP address of the router in the address bar of the Internet browser on a local PC that is connected to the IP router. (ex: http://192.168.0.1)

2.First, check the local connection properties from the “Network Connection” on the local PC.

Ex) IP : 192.168.0.200

Subnet mask : 255.255.255.0

Gateway : 192.168.0.1

3.Provide the IP router address to display the login dialog where you enter the router ID and password.

NETWORK

IP SETUP

DHCP

 

 

 

DDNS

IP ADDRESS

 

192.168.0.200

GATEWAY

 

192.168.0.1

E-MAIL

SUBNET MASK

 

255.255.255.0

1st DNS SERVER

 

168.126.63.1

 

2nd DNS SERVER

 

168.126.63.2

 

RTSP SERVICE PORT

554

AUTO PORT

DELETE PORT PORT TEST

 

WEB SERVER PORT

8080

AUTO PORT

DELETE PORT

 

DDNS HOST NAME

http://ff00378.websamsung.net:8080

MAX TX SPEED

8192 KBYTE

HELP

CANCEL

APPLY

CLOSE

4.Access the DHCP setup menu to switch the router mode to DHCP server mode and provide the start address and the end one.

Enter the start (192.168.0.100) and the end (192.168.0.200) addresses.

MThe addresses mentioned above may differ depending on the router so refer to the router manual for more information.

English _39

Image 39
Contents SRD-450 Overview FeaturesOverview Important Safety InstructionsRisk of Electric Shock Do not Open English Before Start BatteryStandards Approvals Package ContentsContents Product Specification BackupSetup Using the iPhonePart Names and Functions Front MenuLED Part Names and Functions Rear DVR Remote ControlChanging Remote Control ID Connecting the alarm Input signal Connecting with other deviceConnecting the AUDIO, SPEAKER, MOUSE, and Power Cable Connecting the Alarm I/OConnecting with Other Device Network ConnectionLocal System Configuration Internet Total System ConfigurationGetting Started Getting startedStarting the System LOG onPower OFF LOGLOG OFF Description Live Screen ConfigurationLive Icons on the Live ScreenView the Launcher Menu Auto Sequence Switching the screen modeDisplay RecordTo playback by time selection PlaybackPlayback Screen To playback by time optionHow to use remote control and mouse DVR setupBefore Starting Setting UP System SetupSystem DATE/TIMEYYYY/MM/DD, DD/MM/YYYY, MM/DD/YYYY System Management File in the network Remote ControllerTo update the firmware To update the networkTo change the camera title Using the Virtual KeyboardCamera CameraColor CovertAudio Connection To deselect the motion area SetupMotion Sensor To select a motion areaMonitor OSDAdding Sequence SequenceSelect a list to edit Edit window appears When the ADD Sequence window appears, press the ADD buttonBuzzer You can use the remote control to activate the buzzerSound AudioUser User ManagementTo add a user account To change the user information User Authority Server IP Setup Network DNS Server will be automatically filledTo view the Help DdnsDVR Network Connection and SettingsMail SecurityDynamic IP Dhcp Setup Mode If not using a router for network connectionIf using a router Static IP Setup ModeRouter Port Forwarding Event / SensorHDD Event DVR ConnectionEvent / Sensor Alarm InputAlarm Output Mode Set the output mode of the alarmBuzzer OUT Mail Notification If set to ON, recording will proceed by overwriting It will be disabled if Overwrite is set to OFFDisk Management OverwriteRecord Setup To start the Record SetupRecording Operation To set the record mode CONTINUOUS/MOTION RecordingTo specify the recording size/FPS/quality From the Time bar, select a cell that you want to Alarm RecordingUse the direction buttons to move to Alarm Adjust the sizeInstant Recording To specify the alarm recording timeFrom the Alarm Recording menu screen, select Activation You can specify the recording size in manual recording modeBackup BackupNEW Backup Release Reserved Data ManagementPlayback Search & playSearch Search by TimeRight Moves to the rightmost of the log list Search by EventSystem Requirements What is web viewer?Web viewer IntroductionWeb viewer To connect to the Web ViewerEnglish Live Viewer Live Viewer At a GlanceSelect a channel to display on the screen Single Split Switching between split modesTo record video To print the screenTo view the log ActiveX SettingScreen Capture To view the statusTimeline Search ViewerSearch Viewer At a Glance Set the recording properties as necessarySearch by Event Search by TimeClick the Setup tab to display the DVR remote setup screen SetupSetup Viewer At a Glance Camera SettingColor setting Motion settingOSD setting Management setting Monitor settingAudio/Buzzer setting Date/Time settingAlarm Recording Setting Control Device SettingRecording Operation Setting Continuous/Motion Recording SettingInstant Recording Setting User Management SettingUser Authority Setting Alarm Input Setting IP Setup SettingMail Setting HDD Event SettingInformation Alarm output settingBuzzer out setting Mail notification settingUsing the iPhone Appendix Product SpecificationAVI Ntsc ENGLISH/FRANÇAIS/ESPAÑOLРУССКИЙ/SVENSKA/ČESKÝ DHCP, DNS, DDNS, NTPVersion 2, June Open Source License Report on the ProductGNU General Public License PreamblePage END of Terms and Conditions No WarrantyHow to Apply These Terms to Your New Programs Some devices are designed to deny users access toGNU Lesser General Public License instead of this License Source Code Terms and ConditionsConveying Verbatim Copies Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having CopiesPatents Use with the GNU Affero General Public LicenseRevised Versions of this License END of Terms and Conditions GNU Lesser General Public LicenseLimitation of Liability Interpretation of Sections 15Page Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries Original SSLeay License OpenSSL LicensePage Correct disposal of batteries in this product Channel DVR TEL +44-1932-45-5300 FAX +44-1932-45-5325 Chertsey, Surrey, United Kingdom KT16 OPS