Samsung SRD-450 user manual Disk Management, It will be disabled if Overwrite is set to OFF

DVR setup

DISK MANAGEMENT

You can specify the recording auto deletion and overwrite options and format the HDD recording data. See the previous section to repeat steps 1~3. (Page 23)

1.Use the direction buttons to move to the upper <DISK MANAGEMENT> icon and press the [ENTER] button. The DISK MANAGEMENT screen appears.

DISK MANAGEMENT

2.Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value.

•AUTO DELETE: Specify the auto deletion period. You can search for recording data only in that specified period.

-The Auto Delete function is available only if OVERWRITE is set to ON.

-The NTSC-type model does not support the function of AUTO DELETE.

DISK MANAGEMENT
DISK	OVERWRITE	ON
MANAGEMENT
	AUTO DELETE	OFF
	FORMAT	START
		CANCEL	APPLY	CLOSE

J If there remains a large-sized data file, setup may take a while. Note that recording will be disabled until setup is completed.

	It will be disabled if OVERWRITE is set to OFF.	DISK MANAGEMENT
		MANAGEMENT OVERWRITE	ON
		DISK
		AUTO DELETEWARNING	OFF
• OVERWRITE		FORMAT	START
		Do you want to continue?
- If set to <ON>, recording will proceed by overwriting		All recorded data will be removed.
		OK	CANCEL
the existing data even if the size of the recording data
exceeds the HDD capacity.
- If set to <OFF> and the HDD is full, the DVR stops			CANCEL APPLY CLOSE
recording and sounds the buzzer or alarm that is set
to operate in <EVENT / SENSOR>. (Page 40)
A message of "DISK FULL" is displayed on the screen.

•FORMAT : Format the hard disk drive. ① Press the <START> button.

②You will see the alert that recording data can be deleted.

③Press the <OK> button.

J Note that formatting the HDD will delete all existing data.

3.When your settings are completed, press the <APPLY> button on the bottom. Your settings will be applied.

4.Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.

44_ DVR setup