DVR setup
NETWORK
You can configure the settings of IP SETUP, DDNS and
See the previous section to repeat steps 1~3. (Page 23)
IP SETUP
You can specify the IP of the DVR according to the network connection.
Using the mouse may help easy setup.
1. Use the direction buttons to move to the upper |
|
|
|
|
|
| |
<NETWORK> icon and press the [ENTER] button. |
|
|
|
|
|
| |
The IP Setup screen appears. |
|
|
|
|
|
| |
|
| NETWORK |
|
|
|
| |
2. Use direction buttons (▲▼◄►) to move to a desired |
| NETWORK |
|
|
|
| |
item, and press the [ENTER] button to set the value. |
|
|
|
|
| ||
• | DHCP: Set the IP address of the DVR to a dynamic IP. | IP SETUP | DHCP |
|
|
|
|
| - If <DHCP> is selected, the setting values of IP ADDRESS, |
| SUBNET MASK |
| 255.255.255.0 |
| |
|
| DDNS | IP ADDRESS |
| 192.168.1.200 |
| |
| GATEWAY, SUBNET MASK, 1st DNS SERVER and 2nd | GATEWAY |
| 192.168.1.1 |
| ||
| 2nd DNS SERVER |
| 168.126.63.2 |
| |||
| DNS SERVER will be automatically filled. | 1st DNS SERVER |
| 168.126.63.1 |
| ||
|
| WEB SERVER PORT | 8080 | AUTO PORT | DELETE PORT | PORT TEST | |
| - If <DHCP> is not selected, you should manually enter |
| RTSP SERVICE PORT | 554 | AUTO PORT | DELETE PORT | |
|
| DDNS HOST NAME | http://ff00378.websamsung.net:8080 |
| |||
|
| MAX TX SPEED |
| 8192 KBYTE |
| ||
| the setting values of IP ADDRESS, GATEWAY, |
|
|
|
|
|
|
| SUBNET MASK, 1st DNS SERVER and 2nd DNS |
|
| HELP | CANCEL | APPLY | CLOSE |
| SERVER. |
|
|
|
|
|
|
For the IP address, contact the network administrator.
•IP ADDRESS: Enter an IP address.
•GATEWAY: Enter a gateway address.
•SUBNET MASK: Enter a subnet mask address.
•1st DNS SERVER: Enter the first DNS server address.
•2nd DNS SERVER: Enter the second DNS server address.
•RTSP SERVICE PORT: Indicates a port used when the remote management software program accesses the DVR.
•WEB SERVER PORT: Indicates a port used to connect to the DVR using the web browser.
•AUTO PORT: Registers connectable address from outside to DDNS HOST NAME automatically.
•DELETE PORT: Unblock registered port forwarding status.
•PORT TEST: Check the current RTSP PORT, HTTP PORT status by itself whether it is connectable.
•DDNS HOST NAME: Displays the MAC address of the DVR that connects to the DDNS.
•MAX TX SPEED: Set the network transfer speed.
Select one from 56, 128, 256, 512, 1024, 2048, 4096, 8192KBYTE.
The video will be transferred below the set speed, which may differ according to the network connection status.
3.When your settings are completed, press the <APPLY> button on the bottom. Your settings will be applied.
4.Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.
36_ DVR setup