DVR setup
ALARM OUTPUT
You can specify the alarming conditions and the operating time.
Using the mouse may help easy setup.
1.Use the direction buttons to move to <ALARM
OUTPUT> in the left corner of the EVENT/SENSOR setup screen and press the [ENTER] button.
2.Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value.
•OPERATION: Set the operation of the alarm output.
-If set to <ENABLE>, the applicable menu is activated where you can set other options.
-If set to <DISABLE>, other items will be disabled.
•MODE: Set the output mode of the alarm.
EVENT / SENSOR |
|
|
| ||
HDD EVENT | OPERATION | ENABLE | DURATION |
| 5 SEC |
ALARM | MODE | TRANSPARENT | HDD EVENT |
| OFF |
| ALARM | VIDEO LOSS |
| MOTION | |
INPUT | CH 1 |
| |||
ALARM |
|
|
|
| |
CH 2 |
|
|
|
| |
OUTPUT | CH 3 |
|
|
|
|
BUZZER OUT | CH 4 |
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
NOTIFICATION |
|
|
|
|
|
|
|
| CANCEL | APPLY | CLOSE |
-If set to <LATCHED>, the alarm will sound for as much time as defined in DURATION.
-If set to <TRANSPARENT>, the DURATION item will be disabled.
•DURATION : Set the duration of the alarm output.
-If you select <UNTIL KEY>, the buzzer will be stopped when you press any button on the front panel or the remote control.
•HDD EVENT: Set to use the alarm output if the HDD is full.
•ALARM, VIDEO LOSS, MOTION: Set the alarm output for each channel if an event of alarm, video loss or motion detection occurs.
3.When your settings are completed, press the <APPLY> button on the bottom. Your settings will be applied.
4.Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.
BUZZER OUT
You can specify the alarm input channel and the event conditions for the buzzer.
Using the mouse may help easy setup.
1.Use the direction buttons to move to <BUZZER OUT> in the left corner of the EVENT/SENSOR setup screen and press the [ENTER] button.
2.Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value.
•OPERATION: Set the operation of the buzzer output.
•HDD EVENT: Set the buzzer output if a HDD event occurs.
•MODE: Set the output mode of the buzzer.
-If set to <LATCHED>, the buzzer will sound for as much time as defined in DURATION.
EVENT / SENSOR |
|
|
| ||
HDD EVENT | OPERATION | DISABLE | HDD EVENT |
| OFF |
ALARM | MODE | TRANSPARENT | DURATION |
| 5 SEC |
| ALARM | VIDEO LOSS |
| MOTION | |
INPUT | CH 1 |
| |||
ALARM |
|
|
|
| |
CH 2 |
|
|
|
| |
OUTPUT | CH 3 |
|
|
|
|
BUZZER OUT | CH 4 |
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
NOTIFICATION |
|
|
|
|
|
|
|
| CANCEL | APPLY | CLOSE |
-If set to <TRANSPARENT>, the DURATION item will be disabled.
•DURATION : Set the duration of the buzzer output.
-If you select <UNTIL KEY>, the buzzer will be stopped when you press any button on the front panel or the remote control.
•ALARM, VIDEO LOSS, MOTION: Set the buzzer output for each channel if an event of alarm, video loss or motion detection occurs.
42_ DVR setup