Samsung SRD-450 user manual System, Date/Time, Yyyy/Mm/Dd, Dd/Mm/Yyyy, Mm/Dd/Yyyy

CANCEL APPLY CLOSE

DVR setup

SYSTEM

You can configure the settings of DATE/TIME, SYSTEM MANAGEMENT and REMOTE CONTROLLER. See the previous section to repeat steps 1~3. (Page 23)

DATE/TIME

You can specify the display time.

Using the mouse may help easy setup.

1.	Use the direction buttons to move to the upper
	<SYSTEM> icon and press the [ENTER] button.
	The DATE/TIME setup screen appears.
		SYSTEM
2.	Use direction buttons (▲▼◄►) to move to a desired	SYSTEM
	item, and press the [ENTER] button to set the value.

• DATE TIME: Set the current time and date.	DATE / TIME	DATE TIME	2010/01/01 08:17:10
• DATE FORMAT: Set the date format.	SYSTEM	DATE FORMAT	YYYY/MM/DD
	MANAGEMENT	TIME FORMAT	24 HOUR
YYYY/MM/DD, DD/MM/YYYY, MM/DD/YYYY	REMOTE	NETWORK TIME SERVER SETUP	POOL.NTP.ORG
	CONTROLLER		SYNC.
• TIME FORMAT: Set the time format to either AM/PM or		TIME ZONE SETUP	D . S . T
		GMT+06:00 AMERICA/CST	OFF

24 hours.

•NETWORK TIME SERVER SETUP: Set the current time

using the time server. If you press the <SYNC.> button while connected to

Internet, the time will be set from the time server.

If the player has an existing recording data in the same time schedule, you are prompted to delete it.

Please check the followings if NTP does not work properly.

IP ADDRESS, GATEWAY, SUBNET MASK, 1st DNS SERVER, 2nd DNS SERVER of IP SETUP in NETWORK menu.

•TIME ZONE SETUP: Set the GMT standard time of your area.

•D.S.T: Turn on or off the daylight saving time.

3.When your settings are completed, press the <APPLY> button on the bottom. Your settings will be applied.

4.Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.

24_ DVR setup