Samsung SRD-450 user manual Ddns, To view the Help

Page 37

To view the HELP

 

You can view the explanation of each item of the IP SETUP menu.

 

1. Press the <HELP> button in the lower corner of the IP

NETWORK

SETUP menu.

2. Read through the help and press the <CLOSE> button

DHCP : When enabled, the DVR will obtain an IP address automatically if connected to a DHCP server or router.

GATEWAY : If DHCP is not being used, the gateway IP address can be manually set.

 

IP SETUP

 

WEB SERVICE : When enabled, allows remote connections using internet Explorer or other web browsers.

to close the window.

IP ADDRESS : If DHCP is not being used, the IP address can be manually set.

1ST DNS SERVER : If DHCP is not being used, the first DNS server can be manually set.

 

DDNS

 

SUBNET MASK : If DHCP is not being used, the subnet mask can be manually set.

 

2ND DNS SERVER : If DHCP is not being used, the second DNS server can be manually set.

 

E-MAIL

 

RTSP : User can input a port number which is 554 or greater than 1024 as RTSP service port.

 

WEB SERVER PORT : The port number that the DVR uses to support remote connection from Internet Explorer

 

or other web browsers.

 

DDNS Name : After automatic port forwarding it shows an address that user can connect.

 

MAX TX SPEED : Specifies the maximum bandwidth that the DVR can use during a remote connection.

 

DDNS : When enabled, the DVR can be accessed through a Dynamic DNS server.

 

Commonly used if a broadhand connection does not have a static IP address.

 

DDNS SERVER : If DDNS is enabled, the host DDNS server is specified here.

 

DDNS HOST NAME : User can input a name of server that can serve dynamic DNS service.

 

CLOSE

 

HELP CANCEL APPLY CLOSE

DDNS

You can specify a DDNS site to access when a remote user connects to the network.

Using the mouse may help easy setup.

DDNS is an acronym for Dynamic DNS(Domain Name System).

DNS is a domain service that directs the character-based (easy to remember) domain name (ex: www. google.com) to the number-based IP address (64.233.189.104).

DDNS(Dynamic DNS) is the IP registration service that registers a domain name that the user remembers and a changed IP address with the DDNS server so that the user can redirect to the registered domain name if the previous IP address is changed in a dynamic IP environment.

DVR SETUP

1.Use the direction buttons to move to <DDNS> in the left corner of the NETWORK setup menu and press the [ENTER] button.

2.Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value.

DDNS: Select to set the DDNS connection.

DDNS SERVER: Select a DDNS server to connect to.

TEST: Try a test connection to the DDNS server.

3.When your settings are completed, press the <APPLY> button on the bottom.

Your settings will be applied.

NETWORK

 

 

 

IP SETUP

 

ON

 

DDNS

 

 

DDNS SERVER

websamsung.net

 

DDNS

 

TEST

 

E-MAIL

 

 

 

HELP

CANCEL

APPLY

CLOSE

4.Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.

English _37

Image 37
Contents SRD-450 Overview FeaturesOverview Important Safety InstructionsRisk of Electric Shock Do not Open English Before Start BatteryStandards Approvals Package ContentsContents Setup BackupUsing the iPhone Product SpecificationMenu Part Names and Functions FrontLED Part Names and Functions Rear DVR Remote ControlChanging Remote Control ID Connecting the AUDIO, SPEAKER, MOUSE, and Power Cable Connecting with other deviceConnecting the Alarm I/O Connecting the alarm Input signalNetwork Connection Connecting with Other DeviceLocal System Configuration Internet Total System ConfigurationStarting the System Getting startedLOG on Getting StartedLOG Power OFFLOG OFF Live Live Screen ConfigurationIcons on the Live Screen DescriptionView the Launcher Menu Display Switching the screen modeRecord Auto SequencePlayback Screen PlaybackTo playback by time option To playback by time selectionBefore Starting Setting UP DVR setupSystem Setup How to use remote control and mouseDATE/TIME SystemYYYY/MM/DD, DD/MM/YYYY, MM/DD/YYYY System Management To update the firmware Remote ControllerTo update the network File in the networkCamera Using the Virtual KeyboardCamera To change the camera titleCovert ColorAudio Connection Motion Sensor SetupTo select a motion area To deselect the motion areaMonitor OSDAdding Sequence SequenceSelect a list to edit Edit window appears When the ADD Sequence window appears, press the ADD buttonSound You can use the remote control to activate the buzzerAudio BuzzerUser Management UserTo add a user account To change the user information User AuthorityNetwork IP SetupDNS Server will be automatically filled ServerTo view the Help DdnsMail Network Connection and SettingsSecurity DVRIf using a router If not using a router for network connectionStatic IP Setup Mode Dynamic IP Dhcp Setup ModeHDD Event Event / SensorDVR Connection Router Port ForwardingEvent / Sensor Alarm InputMode Set the output mode of the alarm Alarm OutputBuzzer OUT Mail Notification Disk Management It will be disabled if Overwrite is set to OFFOverwrite If set to ON, recording will proceed by overwritingTo start the Record Setup Record SetupRecording Operation CONTINUOUS/MOTION Recording To set the record modeTo specify the recording size/FPS/quality Use the direction buttons to move to Alarm Alarm RecordingAdjust the size From the Time bar, select a cell that you want toFrom the Alarm Recording menu screen, select Activation To specify the alarm recording timeYou can specify the recording size in manual recording mode Instant RecordingBackup BackupNEW Backup Release Reserved Data ManagementSearch Search & playSearch by Time PlaybackRight Moves to the rightmost of the log list Search by EventWeb viewer What is web viewer?Introduction System RequirementsWeb viewer To connect to the Web ViewerEnglish Live Viewer At a Glance Live ViewerSelect a channel to display on the screen To record video Switching between split modesTo print the screen Single SplitScreen Capture ActiveX SettingTo view the status To view the logSearch Viewer At a Glance Search ViewerSet the recording properties as necessary TimelineSearch by Event Search by TimeSetup Viewer At a Glance SetupCamera Setting Click the Setup tab to display the DVR remote setup screenMotion setting Color settingOSD setting Audio/Buzzer setting Monitor settingDate/Time setting Management settingRecording Operation Setting Control Device SettingContinuous/Motion Recording Setting Alarm Recording SettingUser Management Setting Instant Recording SettingUser Authority Setting Mail Setting IP Setup SettingHDD Event Setting Alarm Input SettingBuzzer out setting Alarm output settingMail notification setting InformationUsing the iPhone Appendix Product SpecificationРУССКИЙ/SVENSKA/ČESKÝ Ntsc ENGLISH/FRANÇAIS/ESPAÑOLDHCP, DNS, DDNS, NTP AVIGNU General Public License Open Source License Report on the ProductPreamble Version 2, JunePage END of Terms and Conditions No WarrantySome devices are designed to deny users access to How to Apply These Terms to Your New ProgramsGNU Lesser General Public License instead of this License Source Code Terms and ConditionsConveying Verbatim Copies Additional Terms Automatic Licensing of Downstream Recipients Acceptance Not Required for Having CopiesUse with the GNU Affero General Public License PatentsRevised Versions of this License Limitation of Liability GNU Lesser General Public LicenseInterpretation of Sections 15 END of Terms and ConditionsPage Modified work must itself be a software library Page How to Apply These Terms to Your New Libraries Original SSLeay License OpenSSL LicensePage Correct disposal of batteries in this product Channel DVR TEL +44-1932-45-5300 FAX +44-1932-45-5325 Chertsey, Surrey, United Kingdom KT16 OPS