Samsung SRD-450 user manual Remote Controller, To update the firmware, To update the network

DVR setup

To update the firmware

1.Connect the device storing the update files to the USB port.

2.Press <USB> button in system management menu.

3.Select device, you will see the firmware list.

4.Select update file in <FIRMWARE LIST>.

5.Press <UPDATE> button in the Firmware upgrade window.

SYSTEM
DATE / TIME	FIRMWARE UPDATE				INFO
	SYSTEM INFORMATION
SYSTEM	SYSTEM NAME		SELECT DEVICE		SYSTEM ID
			USB MEMORY
MANAGEMENT	FIRMWARE UPDATE				USB	NETWORK
			FIRMWARE LIST		LOAD
REMOTE	FACTORY DEFAULT					LOAD
	SYSTEM DATA				SAVE
CONTROLLER	PASSWORD				ON
	AUTO LOGOUT	UPDATE		CANCEL	ON
	DURATION				1 MIN
				CANCEL	APPLY	CLOSE

6.The update status bar appears and the system will perform the upgrade.

7.When the upgrade is completed, the system restarts.

SYSTEM
DATE / TIME	FIRMWARE UPDATE			INFO
	SYSTEM INFORMATION
SYSTEM	SYSTEM NAME	SELECT DEVICE		SYSTEM ID
		USB MEMORY		USB	NETWORK
MANAGEMENT	FIRMWARE UPDATE
	FACTORY DEFAULTFIRMWARE LIST			LOAD
REMOTE	15110F/W.1UPGRADE.1.71			SAVE	LOAD
	SYSTEM DATA
CONTROLLER	PASSWORD			ON
	AUTO LOGOUT			ON
	DURATION		CANCEL	1 MIN
	UPDATE
			CANCEL	APPLY	CLOSE

To update the network

Search the network system for an updateable file before proceeding with the update. Check if the network connection is made properly.

1. Press the <NETWORK> button.

2. Click <CHECK> to check if there is any new updateable	SYSTEM
	DATE / TIME	FIRMWARE UPDATE		SYSTEM ID
file in the network.	SYSTEM	SYSTEMCURRENTNAME VERSION	SRD-450_V0.10_XXXXXX
		SYSTEM INFORMATION		INFO
	MANAGEMENT	FIRMWARENEWUPDATEVERSION	0.0.0.0	USB	NETWORK
	REMOTE	FACTORY DEFAULT		LOAD	LOAD
		SYSTEM DATA	DOWNLOAD	SAVE
	CONTROLLER	CHECK		ON
		PASSWORD UPDATE	CANCEL
		AUTO LOGOUT		ON
		DURATION		1 MIN
			CANCEL	APPLY	CLOSE

REMOTE CONTROLLER

Using the mouse may help easy setup.

1.Use the direction buttons to move to <REMOTE CONTROLLER> in the left corner of the SYSTEM setup menu and press the [ENTER] button.

2.Use direction buttons (▲▼◄►) to move to a desired item, and set the <REMOTE CONTROLLER ID>.

3.When your settings are completed, press the <APPLY> button on the bottom.

Your settings will be applied.

4.Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.

SYSTEM
DATE / TIME		REMOTE CONTROLLER ID
SYSTEM
	DEV.	0
MANAGEMENT
REMOTE
CONTROLLER
		CANCEL	APPLY	CLOSE

26_ DVR setup