Samsung SRD-450 user manual Mail, Network Connection and Settings, Security, Dvr, Internet

DVR setup

E-MAIL

You can send an email notice to DVR registered users at a certain interval or when an event occurs.

Using the mouse may help easy setup.

1.Use the direction buttons to move to <E-MAIL> in the left corner of the NETWORK setup menu and press the [ENTER] button.

2.Use direction buttons (▲▼◄►) to move to a desired item, and set the value.

•SERVER: Set the mail server.

This is a mail server used when the DVR notifies with email.

You must use the mail server that supports Microsoft Outlook.

Enter the mail server using the virtual Keyboard. (Page 27)

	NETWORK
IP SETUP	SERVER
		25
DDNS	PORT
	SECURITY	OFF
E-MAIL	USER
	PASSWORD
	FROM
	TEST E-MAIL	TEST
	CANCEL	APPLY	CLOSE

•PORT: Enter the mail server port.

•SECURITY:

-If set to <ON>, your email will be sent in secure mode.

 However, the email will not be sent if the server you entered does not support SSL.

-If set to <OFF>, this will send emails of the server that does not support SSL.

•USER: Enter the mail account ID of the sender.

•PASSWORD: Enter the mail account password of the sender.

•FROM: Provide the sender email that will be displayed in the email notice.

•TEST E-MAIL: Sends a test email to check if the current setting can send emails normally.

3.When your settings are completed, press the <APPLY> button on the bottom. Your settings will be applied.

4.Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.

Network Connection and Settings

According to the user network connection, configure a proper network settings so as to change the settings of a remote DVR and to search and play the recording data via a local or external Internet connection.

M For more information, refer to “Network Setup Guide” that comes with the DVR.

DVR
DVR	IP Sharer

xDSL or	INTERNET
	xDSL or
Cable Modem	Cable Modem

External

Remote PC

Local PC

DDNS Server

(websamsung.net)

38_ DVR setup