Atek electronic RM200 user manual Installation

Page 7

Installation

•Pull the battery protector film out from the battery compartment on the back of the remote control.

•Move the on/off button on the right side of the remote control to the “on” position by sliding it up. To confirm that it is on, push the small round button located right above the Atek logo to see if the white LED illumination light below the logo turns on.

Stagehand User’s Manual, page 6

Image 7

Contents Stagehand Contents Telephone Need Help?Support@atek.com Laser Pointer Safety InformationPlug & play installation. No software installation FeaturesFeatures Installation Installation Operation Start slide show F5 commandAdvance and reverse slides LED illumination light Black screen B commandExit slide show Esc command Laser pointerToggle window Alt-Tab command White screen W commandDisable laser pointer Reprogram up and down buttons Default settings for the up and down buttons are Up buttonWhy reprogram the remote control Reprogram remote control ID code and channelHow to reprogram the remote control Reprogram USB receiver Why reprogram the receiverThen quickly release the button within 1.5 seconds How to reprogram the receiver Add ID code and channelAccept all ID codes and channels Then quickly release the button within two secondsFrequently Asked Questions FAQs Try a different USB port on the computer Frequently Asked Questions FAQs Frequently Asked Questions FAQs Q9 Can I control multiple computers with one remote control? Q16 Does Stagehand control a projector? Frequently Asked Questions FAQs Compatibility and Specifications Maintenance Laser Regulatory ComplianceFCC Notice CanadaRemedies One Year Limited WarrantyLimitation of Liability Contact Information Other Atek Products RM200UMV1