Atek electronic RM200 user manual Reprogram up and down buttons

Page 12

Operation

Reprogram up and down buttons

The default settings for the up and down buttons are:

Up button

=

page up command

Down button

=

page down command

The buttons can be reprogrammed, but only as a pair of changes, not individually.

To reprogram, push and hold the function button, and without releasing, push BOTH the up button AND the down button (AT THE SAME TIME) within two seconds.

If you do not push the up button and down button within two seconds, you will invoke the black screen function instead.

If you push only the up button or only the down button, you will invoke the exit slide show function instead.

The LED illumination light will immediately flash three times to confirm the change. The first time you do this procedure, the programming will change to:

Up button

=

page down command

Down button

=

page up command

If you do it again, the programming will change to:

Up button

=

arrow up command

Down button

=

arrow down command

If you do it again, the programming will change to:

Up button

=

arrow down command

Down button

=

arrow up command

If you do it again, the programming will change to the default setting.

Stagehand User’s Manual, page 11

Image 12
Contents Stagehand Contents Need Help? TelephoneSupport@atek.com Safety Information Laser PointerFeatures Plug & play installation. No software installationFeatures Installation Installation Start slide show F5 command OperationAdvance and reverse slides Black screen B command Exit slide show Esc commandLaser pointer LED illumination lightWhite screen W command Toggle window Alt-Tab commandDisable laser pointer Default settings for the up and down buttons are Up button Reprogram up and down buttonsReprogram remote control ID code and channel Why reprogram the remote controlHow to reprogram the remote control Why reprogram the receiver Reprogram USB receiverHow to reprogram the receiver Add ID code and channel Then quickly release the button within 1.5 secondsThen quickly release the button within two seconds Accept all ID codes and channelsFrequently Asked Questions FAQs Try a different USB port on the computer Frequently Asked Questions FAQs Frequently Asked Questions FAQs Q9 Can I control multiple computers with one remote control? Q16 Does Stagehand control a projector? Frequently Asked Questions FAQs Compatibility and Specifications Maintenance Regulatory Compliance FCC NoticeCanada LaserOne Year Limited Warranty RemediesLimitation of Liability Contact Information Other Atek Products RM200UMV1