Atek electronic RM200 user manual Q16 Does Stagehand control a projector?

Page 22

Frequently Asked Questions (FAQs)

Q12: Can I store presentations on the USB receiver?

A12: No, the USB receiver is not a flash memory drive.

Q13: How long should the battery last?

A13: The battery lasts for many hours of normal operation but will gradually weaken over time. Exact battery life depends on how often you use the Stagehand, how you use it, and whether you turn off the remote control when you store it. Frequent use of the laser pointer and/or LED illumination light will deplete the battery more quickly. As a reference, based on the design specifications of Stagehand, if a presentation control button were pushed one hundred times per day, the laser pointer pushed ten times per day for 20 seconds, and the LED illumination light pushed ten times per day for ten seconds, the estimated battery life would be 100-120 days.

Q14: Where can I buy a replacement battery?

A14: You can buy a CR2032 coin cell battery at Radio Shack and other stores that sell a wide variety of batteries.

Q15: What do the indications of the USB receiver’s LED mean?

A15: Solid color means the receiver has power from the computer. Flashing means either it is receiving signals from the remote control or it is providing receiver reprogramming feedback. See Operation section.

Q16: Does Stagehand control a projector?

A16: Stagehand does not control a projector directly. It controls it indirectly by sending keyboard commands to control the slide show on your computer.

Stagehand User’s Manual, page 21

Image 22
Contents Stagehand Contents Telephone Need Help?Support@atek.com Safety Information Laser PointerFeatures Plug & play installation. No software installationFeatures Installation Installation Operation Start slide show F5 commandAdvance and reverse slides Laser pointer Black screen B commandExit slide show Esc command LED illumination lightToggle window Alt-Tab command White screen W commandDisable laser pointer Default settings for the up and down buttons are Up button Reprogram up and down buttonsWhy reprogram the remote control Reprogram remote control ID code and channelHow to reprogram the remote control Why reprogram the receiver Reprogram USB receiverHow to reprogram the receiver Add ID code and channel Then quickly release the button within 1.5 secondsThen quickly release the button within two seconds Accept all ID codes and channelsFrequently Asked Questions FAQs Try a different USB port on the computer Frequently Asked Questions FAQs Frequently Asked Questions FAQs Q9 Can I control multiple computers with one remote control? Q16 Does Stagehand control a projector? Frequently Asked Questions FAQs Compatibility and Specifications Maintenance Canada Regulatory ComplianceFCC Notice LaserOne Year Limited Warranty RemediesLimitation of Liability Contact Information Other Atek Products RM200UMV1