Installation
•After your laptop or desktop computer is powered on and fully booted up, plug the Stagehand USB receiver into the computer’s USB port.
A solid color LED on the USB receiver indicates the receiver has power from the computer. The LED flashes when it receives keyboard command signals from the remote control, but do not push any buttons on the remote control yet.
Do NOT push the button on the receiver (the remote control and receiver are already preset in the factory to communicate with each other).
Wait until the
•Optionally install the enclosed neck lanyard per the separate safety warning and installation instructions that come with the lanyard.
Remember to turn the remote control off after use to extend battery life and prevent accidental battery drain.
Read the Operation section below for detailed instructions on how to use your Stagehand.
Stagehand User’s Manual, page 7