Atek electronic RM200 user manual Q9 Can I control multiple computers with one remote control?

Page 21

Frequently Asked Questions (FAQs)

Q8: My remote control does not work from far away.

A8: The Stagehand has a signal distance of approximately 50 feet but this distance may vary depending on various factors.

Check the following:

1.Remove, or move away from, any objects located between the remote control and USB receiver that might be affecting the signal strength.

2.It is possible some other RF signal is interfering. Check that by trying to use the remote control and receiver in a different location or by reprogramming the remote control ID code and channel. See Operation section.

3.If the battery is weak (possibly indicated by a dim and/or flickering laser beam and/or LED illumination light), the RF signal from the remote control might not be strong enough. Try replacing the battery with a new one. See Maintenance section.

Q9: Can I control multiple computers with one remote control?

A9: Yes, if you have multiple sets. See Operation section “Reprogram USB receiver”.

Q10: Can I control one computer with multiple remote controls?

A10: Yes, if you have multiple sets. See Operation section “Reprogram USB receiver”.

Q11: Can I carry a laser pointer or use a wireless presentation controller on commercial aircraft?

A11: Check with your airline and/or relevant government agency, such as the Transportation Security Administration (www.tsa.gov) in the United States, to determine whether there are prohibitions against carrying a laser pointer in carry-on luggage. Use of the remote control’s wireless functions on aircraft may also be subject to restrictions.

Stagehand User’s Manual, page 20

Image 21
Contents Stagehand Contents Need Help? TelephoneSupport@atek.com Laser Pointer Safety InformationPlug & play installation. No software installation FeaturesFeatures Installation Installation Start slide show F5 command OperationAdvance and reverse slides Exit slide show Esc command Black screen B commandLaser pointer LED illumination lightWhite screen W command Toggle window Alt-Tab commandDisable laser pointer Reprogram up and down buttons Default settings for the up and down buttons are Up buttonReprogram remote control ID code and channel Why reprogram the remote controlHow to reprogram the remote control Reprogram USB receiver Why reprogram the receiverThen quickly release the button within 1.5 seconds How to reprogram the receiver Add ID code and channelAccept all ID codes and channels Then quickly release the button within two secondsFrequently Asked Questions FAQs Try a different USB port on the computer Frequently Asked Questions FAQs Frequently Asked Questions FAQs Q9 Can I control multiple computers with one remote control? Q16 Does Stagehand control a projector? Frequently Asked Questions FAQs Compatibility and Specifications Maintenance FCC Notice Regulatory ComplianceCanada LaserRemedies One Year Limited WarrantyLimitation of Liability Contact Information Other Atek Products RM200UMV1