AG Neovo TSC-40/IC manual Recommended operational conditions, Maximum

TSC-40/IC Product Specification

5-2. Recommended operational conditions

(Vcc=3.3 to 5.5V, Vss=0V, Ta=-20 to 85˚C, unless otherwise noted)

Item	Symbol		Limits		Unit	Description
		Minimum	Standard	Maximum
Power supply voltage	VCC	3.3	5.0	5.5	V
Power supply voltage	VSS		0		V
Analog reference voltage	VREF	1.8		VCC	V
“H” input voltage	VIH	0.8VCC		VCC	V
(Pin number 1 - 4, 12 - 32)
“H” input voltage	VIH	0.8VCC		VCC	V
RST, XIN
“L” input voltage	VIL	0		0.2VCC	V
(Pin number 1 - 4, 12 - 32)
“L” input voltage	VIL	0		0.2VCC	V
RST, CNVSS
“L” input voltage	VIL	0		0.16VCC	V
XIN
“H” total peak output current *2	ΣIOH (peak)			-80	mA
(Pin number 1 - 4, 12 - 32)
“L” total peak output current *2	ΣIOL (peak)			80	mA
(Pin number 1 -4, 26 - 32)
“L” total peak output current *2	ΣIOL (peak)			80	mA
(Pin number 12 - 25)
“H” total average output current*2	ΣIOH (avg)			-40	mA
(Pin number 1 - 4, 12 - 32)
“L” total average output current*2	ΣIOL (avg)			40	mA
(Pin number 1 - 4, 26 - 32)
“L” total average output current*2	ΣIOL (avg)			40	mA
(pin number 12 - 25)
“H” peak output current *3	IOH (peak)			-10	mA
(Pin number 1 - 4, 12 - 32)
“L” peak output current *3	IOL (peak)			10	mA
(Pin number 1 - 4, 12 - 32)
“H” average output current *4	IOH (avg)			-5	mA
(Pin number 1 - 4, 12 - 32)
“L” average output current *4	IOL (avg)			5	mA
(Pin number 1 - 4, 12 - 32)
Vibration frequency	XIN			6.0	MHz

*1 Vcc = 4.0 to 5.5V

*2 The total output current is the sum of all the currents flowing through all the applicable ports. The total average current is an average value measured over 100ms. The total peak current is the peak value of all the currents.

*3 The peak output current is the peak current flowing in each port.

*4 The average output current IOL(avg), IOH(avg) in an average value measured over 100ms.

*5 When the oscillation frequency has a duty cycle of 50%.

Document No. DER-S0026A 9 Version 1.2 ©2008 DMC Co., Ltd.