Universal Electronics OCAP 5 manual Using the Master Power Key, Clearing the Master Power Key

Page 20

Atlas OCAP M1056.fm Page 20 Wednesday, April 30, 2008 2:52 PM

2.Enter 9 9 5. The last-selected device key blinks twice.

3.Press PWR once.

4.For the first device you want in the power on sequence, press a device key (e.g., CBL) once.

Then press PWR once. For the second device in the power sequence, press its key once (e.g, TV). Then press PWR.

5.Repeat step 4 up to four more times to add the second, third, fourth, and fifth device, as desired.

6.To save the settings and exit the program:

a.Press CBL once.

b.Press and hold SETUP until the CBL key blinks twice.

Using the Master Power Key

1.After programming, point the remote control

at the devices. Press CBL once.

2.Press PWR once to sequentially turn the

programmed home entertainment devices on or off.

You will see the devices turn on or off according to the programmed sequence.

Clearing the Master Power Key

1.On the remote control, press and hold SETUP

until the last-selected device key blinks twice.

2.Enter 9 9 5. The last-selected device key blinks twice.

3.Press and release PWR.

www.urcsupport.com/atlasocap

20

Image 20
Contents Preprogrammed for Your SET-TOP BOX Table of Contents Backlighting Tips To Enable BacklightingTo Disable Backlighting Introduction Features and Functions Key Charts Key FunctionUse VOL+ or VOL- to raise or lower the audio volume Device Table Device KeyInstalling Batteries On the remote control, press a device key once Programming Device ControlSetting UP a Combo Unit Searching for Your Code Atlas Ocap M1056.fm Page 13 Wednesday, April 30, 2008 252 PM Checking the Codes Programming Channel Control LockLocking Channel Control to CBL Changing Volume LockUnlocking Channel Control Blink twice Locking Volume Control To One Mode Global Volume Lock Programming Cable ID LockProgramming Macro Keys Programming a Macro KeyClearing a Macro Key Using the Master Power KEYProgramming the Master Power Key Using the Master Power Key Clearing the Master Power KeyWrite those settings RE-ASSIGNING Device KeysClearing Custom Programming Activating Backlighting OptionalTroubleshooting Problem Device key does not blink when you press a keyFCC Notice Additional InformationÍMANUFACTURER’S Codes Setup Codes for Audio AmplifiersSetup Codes for Audio Receivers JBL KLH1023, 1609, 1254 Setup Codes for Audio Accessories Setup Codes for Cable Boxes/ConvertersDLO SSI1256 BBK Setup Codes for Cable/DVR/PVR CombosSetup Codes for DVD Players Cavs ESAGPX JSINAD SVA Setup Codes for DVD Recorders Setup Codes for DVD CombosGOI HTSSetup Codes for DVR/PVR Systems Setup Codes for TVsSKY UsdtvAOC CCECXC FlexVision 0710 Fujitsu JCB KECKMC KTVMTC NTC1498, 1523, 1991 SSS TMK TVSSetup Codes for TVs DLP 0047 Setup Codes for TV/DVD Combos Hitachi 1960 ILo 1990 Initial Insignia 1963 Jensen 1933 Setup Codes for TV/VCR Combos Setup Codes for TV/VCR/DVD Combos ABS Carver 0081 HI-Q Multitech 0000 STS 0240, 0036 Atlas Ocap M1056.fm Page 58 Wednesday, April 30, 2008 252 PM Atlas Ocap M1056.fm Page 59 Wednesday, April 30, 2008 252 PM M1056 Revision