Clifford 50.7X manual Timer mode, Press, Enables or disables the remote start timer mode

running. If the vehicle shuts down when locking, then the unit did not enter valet take-over mode.

Timer mode

Command:	Press	two-times and then	.
Feedback: 3MALLATIMERMICON APPEARSEANDNTEXT READSAhTIMER STARTTONv
	The vehicle will confirm with 4 fast parking light flash-
	es.
Notes:	Enables or disables the remote start timer mode.

The system must be armed for the timer mode to operate. The system

WILL STARTTEVERYYHOURSUFOROAAMAXIMUMIOF SIXICYCLES UNTILTCANCELED BY THEH brake, hood, or neutral safety shut-down wires. The remote will respond with the Start and Stop remote start notification during each Start and

3TOP OFPTHEO6EHICLE WHILE INW4IMER MODE

Important: Use Timer Mode in open areas only. Never start and run the vehicle in an enclosed space such as a garage or carport.

To activate timer mode with a manual transmission:

1.Enter the MTS mode.

2.%XIT THE VEHICLE AND ARMMTHETALARM

3.Enter the timer mode. The parking lights quickly flash 4 times to confirm

ENTRYYINTO TIMERMMODE VEHICLE DOES NOTOREMOTE STARTTAT THIS POINT T6EHICLE begins the timer mode sequence.

To exit timer mode with transmitter:

ssPress twice and then press . Parking lights flash slowly four times

CONlRMING TIMER MODEMIS EXITED

To exit timer mode without transmitter:

1.Make sure the remote start system is not operating the engine.

© 2008 Directed Electronics. All rights reserved. 29