Note: Bypass Notification does not occur when the system is in Silent Mode or if the notification chirps have been programmed off by the installer.
Disarming
%XTRATCHIRPS HEARDAWHEN DISARMING THEHSYSTEM ARERTHEH4AMPERP!LERT If four chirps are heard when disarming the system, then the security system was triggered in your absence.
If five chirps are heard when disarming the system, the system was
TRIGGEREDGSO MANY TIMESMTHAT THEH .UISANCE 0ROTECTIONÂC#IRCUITRY HASA bypassed the intended zone. In either case, the status LED will indicate which zone was involved (see Table of Zones).
The security system will retain this information in its memory, and chirp FOUR OR lVEVTIMESMEACH TIME IT IS DISARMED UNTILTTHEHNEXT TIME THAT THEH ignition is turned on.
Note concerning low battery alert: When the batteries in the remote are low the alarm will give an additional chirp when disarming to let you know its time to change the battery in the remote.
System status chirps
4HEHSIRENRWILL CHIRPIWHEN ARMINGDISARMING THEHSYSTEMT4HEHPATTERNNOF chirps will audibly report the system’s status as described below.
Action | Number of Chirps | Description |
Arm | 1 | System armed |
Arm | 1 | System armed with bypass notification |
Disarm | 2 | System disarmed |
42 | © 2008 Directed Electronics. All rights reserved. |