Clifford 50.7X manual Press the AUX button to move up the menu, press

ssRemote start display: Clock, temperature or runtime

!LLOWS YOUOTO CHOOSE WHAT IS DISPLAYEDLIN THEHTEXT DURING THEHREMOTEOSTARTT sequence. Clock displays the current time during remote start. Temperature displays the current cabin temperature during the remote start. Runtime displays the runtime remaining during the remote start.

ssLow Runtime Alert

The remote reports with one short beep followed by 1 short error tone

REPEATEDETWICE ANDNTHEHTEXT AREA DISPLAYS hRUN TIMEvMWHEN THE REMOTE start runtime is at the 3-minutes remaining and one more time at 1 minute remaining. You have the option to let the remote start timeout or use the hRUNTIME RESETv FEATURET7HEN PROGRAMMED h/FFv YOUO WILL NOTORECEIVE AA low runtime alert on the remote.

ss#ARAR/N OR /FF(OME

4URNS /FFFOR /NNCARAOPERATIONAFROM THEHREMOTEO4HEHOPTION FORRhHOMEv is not available.

ss"ACKLIGHTL#OLORH/FF

Turn Off the LCD backlighting or changes the color of the backlighting. Color options include: Blue, green, red, aqua, purple, lime, clear

ssTemperature Units F and C

Display temperature in Fahrenheit or Celsius

ssButton Press Beep On or Off

Turn Off beeps when a button on the remote is pressed

ssSystem Type Remote Start & Security or Remote Start

Select the type of system you are using, security system with remote start or a keyless entry system with remote start (to ensure that the correct icons are displayed on the LCD)

ssClock Set

To enter clock set mode, Press the BUTTONT4HEH,# TEXT DISPLAYPREADSA hHOURv TORCONlRMMENTRYYIN THE CLOCK SET MENU

Press the AUX button to move up the menu, press the button to move

38 © 2008 Directed Electronics. All rights reserved.