Clifford 50.7X manual Using the system, Arm, If errors are found when arming

Using the system

Please note the screen shot to the right of a feature indicates what the display looks like when this feature is activated.

Arm

Command: Press one time to Arm

Feedback: Lock Icon will appear, and one beep from remote

Notes: 0RESSHOLD FORO  SECONDSOTO !RMM the system and then activate the Panic output

Details4HEHSIRENRIN THEHVEHICLEIWILL hCHIRPvIONCE ANDNTHEHPARKINGKLIGHTS will flash once. If the power door locks have been connected, the doors will lock. The system will automatically check for errors when it ARMSS4HE WAYEREMOTE WILLYhCHIRPvMONCE AND THE LOCK ICON APPEAR TO confirm arming. If no arm confirmation is received, the remote will give the Out-Of-Range signal.

If errors are found when arming:

If an alarm trigger zone – such as a door, the trunk, the hood, or a SENSORWASAACTIVE AT THEHTIME OF ARMINGNTHEHSYSTEM WILL hBYPASSv OR ignore, this trigger zone. This allows the system to continue to protect your vehicle using the remaining trigger zones.

You are notified of this active zone immediately after arming the system. 4HEHSIRENRIN THEHVEHICLEIWILL hCHIRPvIAGAINAAFTERTARMINGN4HEH3TATUST,%$% indicator in the vehicle will blink in a pattern to indicate the active zone number error which was found (See Table of Zones). The 2-way REMOTE CONTROLTWILL SOUNDUAASHORTThERRORvRTONE ANDNTHEHTEXT WILLLDISPLAYP the active zone..

© 2008 Directed Electronics. All rights reserved. 17