Configuring Quality of Service

Defining General QoS Settings

Restoring Factory Default QoS Interface Settings

1.Click Basic Setup > Quality of Service > General Settings > General Settings. The CoS Page opens.

2.Select an interface by clicking the

3.Check the Restore Defaults checkbox.

4.Click . The factory defaults are restored on the interface.

Configure Bandwidth Settings

The Bandwidth Settings Page allows network managers to define the bandwidth settings for a specified egress interface. Modifying queue scheduling affects the queue settings globally.

Queue shaping can be based per queue and/or per interface. Shaping is determined by the lower specified value. The queue shaping type is selected in the Bandwidth Settings Page.

To define bandwidth settings:

1.Click Basic Setup > Quality of Service > Global Parameters > Bandwidth. The Bandwidth Settings Page opens:

Figure 158: Bandwidth Settings Page

Page 241

Page 242
Image 242
D-Link DWS/DXS-3200 manual Restoring Factory Default QoS Interface Settings, Configure Bandwidth Settings