D-Link DWS/DXS-3200 manual Defining Gvrp, Gvrp Parameters

DXS/DWS 3200 Series User Guide

Defining GVRP

GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of VLAN membership information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to automatically learn VLANs to bridge ports mapping, without having to individually configure each bridge and register VLAN membership. To define GARP. To define GVRP on the device:

1.Click Advanced Setup > VLAN > GARP > GVRP Parameters. The GVRP Parameters Page opens:

Figure 79: GVRP Parameters Page

The GVRP Parameters Page is divided into port and LAG parameters. The field definitions are the same. The GVRP Parameters Page contains the following fields:

•Unit No. — Displays the stacking member for which the GVRP parameters are displayed.

•GVRP Global Status — Indicates if GVRP is enabled on the device. The possible field values are:

–Enable — Enables GVRP on the selected device.

–Disable — Disables GVRP on the selected device.

•Copy from Entry Number — Indicates the row number from which GARP parameters are copied.

•To Row Number — Indicates the row number to which GARP parameters are copied.

•Interface— DIsplays the port on which GVRP is enabled.

•GVRP State— Indicates if GVRP is enabled on the port. The possible field values are:

–Enable — Enables GVRP on the selected port.

–Disable — Disables GVRP on the selected port.

Page 134