Managing Device Information

Defining Advanced System Settings

Defining Advanced System Settings

The Mode Page allows network managers to enable Jumbo Frames on the device. Jumbo Frames enable the transportation of identical data in fewer frames. This ensures less overhead, lower processing time, and fewer interruptions.

To define advanced system settings:

1.Click System > General > Mode. The Mode Page opens.

Figure 29: Mode Page

The Mode Page contains the following field:

Enable Jumbo Frames — Indicates if Jumbo Frames are enabled on the device. Maximum packet length supported is 10Kb. The possible field values are:

Checked — Enables Jumbo Frames on the device.

Unchecked — Disables Jumbo Frames on the device.

2.Check the Enable Jumbo Frames field.

3. Click

. Jumbo frames are enabled on the device.

Note

New settings will take effect only after resetting the device

Page 63

Page 64
Image 64
D-Link DWS/DXS-3200 manual Defining Advanced System Settings, Click System General Mode. The Mode Page opens