D-Link DWS/DXS-3200 manual System’s LED Indications LED Description

Device Description

LED Definitions

DXS/DWS-3227/3227P

The sytstem LEDs are on the DXS/DWS-3227/3227P device in on the left side of the device. The following figure illustrates the DXS/DWS-3227/3227P system LEDs:

Figure 14: DXS/DWS-3227/3227P LEDs

The LED indications are described in the following table:

Table 4:	System’s LED Indications
LED Description		LED	Description
		Indication
PWR		Green	The device is powered up.
		Off	The device is not powered up.
FAN		Red	Indicates a faulty fan.
		Off	All fans are functioning correctly.
Fault		Red Flashing	The device is currently running POST.
		Red	The device detected POST running error.
RPS		Green	The device is powered through the RPS.
		Off	The device is powered through the AC.
P49/P50 (DXS/DWS-3250) - Link/Act for		Green	Link established on the port.
XG port
P25/P26/P27 (DXS/DWS-3227/3227P) -		Green	Link established on the port.
Link/Act for XG port
		Green Flashing	There is data transmission on the port.
		Off	No link is established on the port.
MS		Red	Device is designated as the stack Master.
		Green	Device is designated as stack member.
		Off	Not a member of a stack (standalone).
PoE		Green	Power is provided at this port
		Off	Power is not provided at this port

Page 19