Configuring Quality of Service

Configuring QoS Mapping

Mapping DSCP Values to Queues

The DSCP to Queue Page contains fields for mapping DSCP settings to traffic queues. For example, a packet with a DSCP tag value of 3 can be assigned to queue 2. To map CoS values to queues:

1.Click Basic Setup > Quality of Service > Queue Mapping > DSCP to Queue. The DSCP to Queue Page opens.

Figure 162:DSCP to Queue Page

The DSCP to Queue Page contains the following fields:

DSCP In — Displays the incoming packet’s DSCP value.

Queue — Specifies the traffic forwarding queue to which the DSCP priority is mapped. Eight traffic priority queues are supported.

2.Define the queue number in the Queue field next to the required DSCP value.

3.Click . The DSCP value is mapped to a queue, and the device is updated.

Page 245

Page 246
Image 246
D-Link DWS/DXS-3200 manual Mapping Dscp Values to Queues, Configuring QoS Mapping