D-Link DWS/DXS-3200 Ports Description, 1000Base-T Gigabit Ethernet Ports, 10G XFP Fiber port

DXS/DWS 3200 Series User Guide

Figure 5: DXS/DWS-3227P Back Panel

The DXS-3200 series back panel is configured as follows:

•Reset Button — Resets the device. The Reset button does not extend beyond the device’s front panel sur- face. This it to avoid accidental device resetting.

•2 Stacking Connectors — The devices provide two stacking 12 Link(XG) interface ports.

•RPS Connector — Redundant Power Supply (RPS) DC connector.

•Power Connector — AC power supply interface.

Ports Description

This section describes the device ports and includes the following topics:

•1000Base-T Gigabit Ethernet Ports

•10G XFP Fiber port

•CX-4 Copper Port

•SFP Ports

•Cable Specifications

1000Base-T Gigabit Ethernet Ports

The device contains a 1000 Base-TX Gigabit 24/48 port. The port is an RJ-45 port which supports half- and full- duplex mode 10/100/1000 Mbps.

10G XFP Fiber port

10Gigabit XFP fiber port. One fixed in DXS/DWS-3227/3227P models.

Optional Modules

The 3200 series have module bays located on the back panel into which optional modules (DEM-411X and DEM- 411XT) can be inserted and then provide additional 10Gigabit copper or fiber port.

CX-4 Copper Port

An optional 10Gigabit copper port. DEM-411T expansion module is inserted in one or two bays located on the back panel.

The following figure describes the DEM - 411T module used for a copper port:

Page 12