D-Link DWS/DXS-3200 manual Configuring Rmon History, Defining Rmon History Control

DXS/DWS 3200 Series User Guide

Configuring RMON History

This section contains the following topics:

•Defining RMON History Control

•Viewing the RMON History Table

Defining RMON History Control

The RMON History Control Page contains information about samples of data taken from ports. For example, the samples may include interface definitions or polling periods. To view RMON history information:

1.Click Advanced Setup > RMON > History > History Control. The RMON History Control Page opens.

Figure 202:RMON History Control Page

The RMON History Control Page contains the following fields:

•History Entry No. — Displays the entry number for the History Control Table page.

•Source Interface — Displays the interface from which the history samples were taken. The possible field values are:

–Port — Specifies the port from which the RMON information was taken.

–LAG — Specifies the port from which the RMON information was taken.

•Sampling Interval — Indicates in seconds the time that samplings are taken from the ports. The field range is 1-3600. The default is 1800 seconds (equal to 30 minutes).

Page 308