DXS/DWS 3200 Series User Guide

Configuring Routing

Once the switch has been defined as a router, statics route can be defined. Network managers can define up to 32 static IP routes. To configure an IP static route:

Note

For configuring the switch as a router, please reffer to the D-Link CLI WLAN CLI Reference Guide

1.Click Basic Setup > Routing > IP Static Route. The IP Static Route Page opens.

Figure 121:IP Static Route Page

The IP Static Route Page contains the following fields:

Dest. IP Address — Defines the destination IP address.

Prefix Length —Defines the IP route prefix for the destination IP. The prefix length must be preceded by a forward slash (/).

Next Hop — Indicates the next hop’s IP address or IP alias on the route.

Route Type —Defines the route type. The possible field values are:

Reject — Rejects the route, and stops routing to the destination network via all gateways.

Remote — Indicates the route is a remote path.

Local — Indicates the route is a local path.

Metric — Indicates the administrative distance to the next hop. The default value is 1.

Remove — Removes the user-defined route. The possible field values are:

Checked — Deletes the user-defined route.

Unchecked — Maintains the user-defined routes. This is the default value.

Page 188

Page 189
Image 189
D-Link DWS/DXS-3200 manual Configuring Routing, IP Static Route