D-Link DWS/DXS-3200 manual Configuring QoS Mapping, Mapping CoS Values to Queues

DXS/DWS 3200 Series User Guide

Configuring QoS Mapping

This section contains information for mapping CoS and DSCP values to queues, and includes the following sec- tions:

•Mapping CoS Values to Queues

•Mapping DSCP Values to Queues

Mapping CoS Values to Queues

The CoS to Queue Page contains fields for mapping CoS values to traffic queues. To map CoS values to queues:

1.Click Basic Setup > Quality of Service > Queue Mapping > CoS to Queue. The CoS to Queue Page opens.

Figure 161:CoS to Queue Page

The CoS to Queue Page contains the following fields:

•Class of Service — Specifies the CoS priority tag values, where zero is the lowest and 7 is the highest.

•Queue — Defines the traffic forwarding queue to which the CoS priority is mapped. Eight traffic priority queues are supported.

•Restore Defaults — Restores the device factory defaults for mapping CoS values to a forwarding queue.

2.Define the queue number in the Queue field next to the required CoS value.

3.Click . The CoS value is mapped to a queue, and the device is updated.

Page 244