D-Link DWS/DXS-3200 manual Configuring Stacking

Initial Configuration

Configuring Stacking

6.On the Startup Menu, press “6”.

The following Stack Menu is displayed:

Stack menu

[1]Set unit number in stack

[2]Change stacking ports

[3]Stack info

[4]Back

Enter your choice or press 'ESC' to exit:

7.To Set a unit number press “1” on the Stack Menu. The following prompt is displayed:

Enter your choice or press 'ESC' to exit:

Unit number in stack: [0-8,0 marks standalone unit] 1

Stacking Ports List - 1 2

Change stacking ports.

Enter #1 stacking port (valid range 1-48 and 49-50) use 'k' to keep current setting (port 1):49

Enter #2 stacking port (valid range 1-48 and 49-50) use 'k' to keep current setting (port 2):50

==== Press Enter To Continue ====

8.Enter the first stacking port.

9.Enter the second stacking port.

10.Press <Enter>. The device is defined within the stack.

11.To change stacking ports press “2” on the Stack Menu. The following prompt is displayed:

Enter your choice or press 'ESC' to exit:

Stacking Ports List - 1 2

Change stacking ports.

Enter #1 stacking port (valid range 1-48 and 49-50) use 'k' to keep current setting (port 1):

k

Enter #2 stacking port (valid range 1-48 and 49-50) use 'k' to keep current setting (port 2):

k

==== Press Enter To Continue ====

12.Enter the first stacking port.

13.Enter the second stacking port.

14.Press <Enter>. The device is defined within the stack.

15.For a stack info press “3” on the Stack Menu. The following prompt is displayed:

Enter your choice or press 'ESC' to exit:

Stack Info:

-----------

Unit stack ID - 1

Stacking Ports List - 49 50

==== Press Enter To Continue ====

Page 45