D-Link DWS/DXS-3200 manual Defining Sntp Global Settings, Sntp Properties

DXS/DWS 3200 Series User Guide

This section contains the following topics:

²Defining SNTP Global Settings

• Defining SNTP Authentication

• Defining SNTP Servers

• Defining SNTP Interface Settings

Defining SNTP Global Settings

The SNTP Properties Page provides information for defining SNTP parameters globally. To define SNTP global parameters:

1.Click System > SNTP > Properties. The SNTP Properties Page opens:

Figure 189:SNTP Properties Page

The SNTP Properties Page contains the following fields:

•Poll Interval — Defines the interval (in seconds) at which the SNTP server is polled for Unicast information. The Poll Interval default is 1024 seconds.

•Enable Receive Broadcast Servers Updates — Defines whether or not the device monitors the SNTP serv- ers for Broadcast server time information on the selected interfaces. The possible values are:

–Enable — Enables the device to receive Broadcast server updates.

–Disable — Disables the device from receiving Broadcast server updates.

•Enable Receive Anycast Servers Updates — Defines whether or not the device polls the SNTP server for Anycast server time information. If both the Enable Receive Anycast Servers Update and the Enable Receive Broadcast Servers Update fields are enabled, the system time is set according to the Anycast server time information. The possible values are:

–Enable — Enables the device to receive Anycast server updates.

–Disable — Disables the device from receiving Anycast server updates.

Page 286