D-Link DWS/DXS-3200 Configuring Wlan Radio Settings, Click . The Modify Radio Setting Page opens

Defining WLAN

Configuring WLAN Radio Settings

–Half — Defines half of the maximum power relative to the selected country’s device power regulations.

–Quarter — Defines a quarter of the maximum power relative to the selected country’s device power regulations.

–Eighth — Defines an eighth of the maximum power relative to the selected country’s device power regulations.

–Minimum — Sets the power to the minimum power settings relative to the selected country’s device power regulations.

•Auto Adjust Signal Strength — Adjusts the transmit power of APs, so the signal strength heard at the sec- ond-closest access point is as close as possible to the target signal-strength configured by the wlan tx-power auto signal-strength global configuration command. Auto Transmit Power can be enabled only when rogue detection is enabled

•User's Traffic — Determines if user traffic is enabled for this radio. The possible field values are:

–Enable — Enables user traffic on the radio frequency. This is the default value.

–Disable— Disables user traffic on the radio frequency.

•Scan for Rogues — Indicates the rogue scanning status. The possible field values are:

–Enabled — Indicates that rogue scanning is enabled.

–Disabled — Indicates that rogue scanning is disabled.

2.Click . The Modify Radio Setting Page opens.

3.Modify the fields.

4.Click . The radio settings are modified, and the device is updated.

Page 157