Configuring Ports

Section 9. Configuring Ports

The Interface Configuration Page contains fields for defining port parameters.

To define port parameters:

1.Click Basic Setup > Interface > Interface Configuration. The Interface Configuration Page opens.

Figure 65: Interface Configuration Page

The Interface Configuration Ports Table contains the following fields:

Unit No. — Indicates the stacking member for which the port information is displayed.

Interface — Displays the port number.

Port Status — Indicates whether the port is currently operational or non-operational. The possible field val- ues are:

Up — Indicates the port is currently operating.

Down — Indicates the port is currently not operating.

Port Speed — Displays the configured rate for the port. The port type determines what speed setting options are available. Port speeds can only be configured when auto negotiation is disabled. The possible field values are:

10 — Indicates the port is currently operating at 10 Mbps.

100 — Indicates the port is currently operating at 100 Mbps.

1000 — Indicates the port is currently operating at 1000 Mbps.

Page 115

Page 116
Image 116
D-Link DWS/DXS-3200 manual Configuring Ports, Interface Configuration