D-Link DWS/DXS-3200 manual Create Wlan Template

Defining WLAN

Defining WLAN Access Points

Figure 96: Create WLAN Template Page

The Create WLAN Template Page contains the following fields:

•Template Name — Defines the WLAN template name. Template names can contain up-to 32 characters.

•Enable Wide Area Support — Enables using remote access points which are connect by Wide Area Net- works (WAN) or the internet. The possible field values are:

–Checked — Enable WAN support.

–Unchecked — Disables WAN support. This is the default value.

•Enable Console Logging — Indicates that recording WLAN events in the console log is enabled. The possi- ble field values are:

–Checked — Enables logging WLAN events.

–Unchecked — Disables logging WLAN events. This is the default value.

•Default L2 VLAN — Defines the Layer 2 default VLAN.

•Enable Tunnel — Enables using an access point in a VLAN. The possible field values are:

–Checked — Enables using an access point in a VLAN.

–Unchecked — Disables using an access point in a VLAN. This is the default value.

3.Define the Template Name, Enable Wide Area Support, Enable Console Logging, Default L2 VLAN, and Enable Tunnel fields.

4.Click . The template is created, and the device is updated.

Page 155