D-Link DWS/DXS-3200 manual SNMPv3 Notification Recipient

Configuring SNMP

Configuring SNMP Notifications

SNMPv3 Notification Recipient

The SNMPv3 Notification Recipient table contains the following fields:

•Recipient IP — Displays the IP address to which the traps are sent.

•Notification Type — Displays the type of notification sent. The possible field values are:

–Trap — Indicates that traps are sent.

–Inform — Indicates that informs are sent.

•User Name — Displays the user to which SNMP notifications are sent.

•Security Level — Displays the means by which the packet is authenticated. The possible field values are:

–No Authentication — Indicates that the packet is neither authenticated nor encrypted.

–Authentication — Indicates that the packet is authenticated.

•UDP Port — The UDP port used to send notifications. The field range is 1-65535. The default is 162.

•Filter Name — Includes or excludes SNMP filters.

•Timeout — The amount of time (seconds) the device waits before resending informs. The field range is 1- 300. The default is 10 seconds.

•Retries — The amount of times the device resends an inform request. The field range is 1-255. The default is 3.

•Remove — Deletes the currently selected recipient. The possible field values are:

–Checked — Removes the selected recipient from the list of recipients.

–Unchecked — Maintains the list of recipients.

2.Click . The Add SNMP Notification Receiver Page opens:

Page 233